C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 11,000 cps |
| Pot Life | 35 seconds | 20 minutes |
| Cure Time | 2 hours | 3 hours |
| Shore A Hardness | — | 40 |
| Specific Volume | 280 cu. in./lb. | 24.7 cu. in./lb. |
| Color | White | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 6 Pillow Soft | Mold Star™ 40T | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 11,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 105A:100B | 1A:1B |
| Pot Life | 35 seconds | 20 minutes |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | 3 hours |
| Shore A Hardness | — | 40 |
| Expansion (approximate) | 10 times | — |
| Foam Density | 6 lb/ft³ | — |
| Specific Gravity | 0.09 g/cc | 1.12 g/cc |
| Specific Volume | 280 cu. in./lb. | 24.7 cu. in./lb. |
| Color | White | Translucent |
| Die B Tear Strength | — | 140 pli |
| Tensile Strength | — | 656 psi |
| Elongation @ Break | — | 500 % |
| 100% Modulus | — | 108 psi |
| Shrinkage | — | <.001 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
FlexFoam-iT!™ 6 Pillow Soft
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties.
› Click here for more FlexFoam-iT!™ flexible foam products.
Mold Star™ 40T
Mold Star™ 14T, 19T, 20T, 31T and 40T are easy to use translucent platinum cure silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature a relatively low viscosity and vacuum degassing is not required for most applications. Mold Star™ T Series silicone cures to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star™ silicone will last a long time in your mold library and are good for casting wax, gypsum, resins, and other materials. An infinite number of color effects can be achieved by adding Silc Pig™ silicone pigments or Cast Magic™ effects powders.
Properly cured Mold Star™ 40T complies with 21 CFR 177.2600 "Rubber articles intended for repeated use" for use with dry food and aqueous food only. This material has been tested by an independent laboratory to comply with 21 CFR 177.2600(e), water extractable limits for repeated use in aqueous food. This material is not intended for repeated use in contact with fatty foods.