C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 1,800 cps |
| Pot Life | 35 seconds | 50 minutes |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 60 |
| Specific Volume | 280 cu. in./lb. | 26.7 cu. in./lb. |
| Color | White | Off White |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 6 Pillow Soft | ReoFlex™ 60 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 1,800 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 105A:100B | 1A:1B |
| Pot Life | 35 seconds | 50 minutes |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 60 |
| Expansion (approximate) | 10 times | — |
| Foam Density | 6 lb/ft³ | — |
| Specific Gravity | 0.09 g/cc | 1.04 g/cc |
| Specific Volume | 280 cu. in./lb. | 26.7 cu. in./lb. |
| Color | White | Off White |
| Die C Tear Strength | — | 132 pli |
| Tensile Strength | — | 782 psi |
| Elongation @ Break | — | 581 % |
| 100% Modulus | — | 256 psi |
| Shrinkage | — | <.001 in. / in. |
Product Description
FlexFoam-iT!™ 6 Pillow Soft
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties.
› Click here for more FlexFoam-iT!™ flexible foam products.
ReoFlex™ 60
ReoFlex™ urethane rubbers offer superior physical and performance properties for production casting of wax, plasters, and resins. ReoFlex™ urethanes are available in 20A, 30A, 40A, 50A and 60A Shore hardnesses and feature convenient one-to-one by volume mix ratios. Vacuum degassing is not necessary and ReoFlex™ rubbers cure with negligible shrinkage to a durable rubber that will last in production. ReoFlex™ “Wet” rubbers will shrink somewhat over time vs. “Dry” formulations.
ReoFlex™ mold rubbers are used for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. Vibrant colors can be achieved by adding So-Strong™ Color Tints, available from Smooth-On.
Casting Concrete? Look into the VytaFlex™ series of urethane mold rubbers. VytaFlex™ urethanes were formulated specifically for casting concrete / pigmented concrete and feature Smooth-On’s exclusive ‘V-Polymer™’ technology.
FOR COMMERCIAL/INDUSTRIAL USE ONLY