C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 250 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 35 seconds | 25 minutes |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 50 |
| Specific Volume | 280 cu. in./lb. | 26.8 cu. in./lb. |
| Color | White | Clear |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 6 Pillow Soft | Clear Flex™ 50 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 250 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 105A:100B | 1A:2B |
| Pot Life | 35 seconds | 25 minutes |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 50 |
| Expansion (approximate) | 10 times | — |
| Foam Density | 6 lb/ft³ | — |
| Specific Gravity | 0.09 g/cc | 1.04 g/cc |
| Specific Volume | 280 cu. in./lb. | 26.8 cu. in./lb. |
| Color | White | Clear |
| Die C Tear Strength | — | 25 pli |
| Tensile Strength | — | 250 psi |
| Elongation @ Break | — | 500 % |
| Shrinkage | — | 0.0015 in. / in. |
| Index of Refraction at 20°C | — | 1.48822 |
| Index of Refraction at 25°C | — | 1.48649 |
Product Description
FlexFoam-iT!™ 6 Pillow Soft
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties.
› Click here for more FlexFoam-iT!™ flexible foam products.
Clear Flex™ 50
Clear Flex™ 50 is a water white clear urethane liquid rubber compounds designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring. Clear Flex™ 50 will cure at room temperature with negligible shrinkage.
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.