C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 300 cps |
| Pot Life | 35 seconds | 7 minutes |
| Cure Time | 2 hours | 1 hour |
| Shore D Hardness | — | 85 |
| Specific Volume | 229 cu. in./lb. | 24.3 cu. in./lb. |
| Color | White | Clear Amber |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 7 FR | TASK™ 9 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 300 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:88B | 115A:100B |
| Pot Life | 35 seconds | 7 minutes |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | 1 hour |
| Shore D Hardness | — | 85 |
| Expansion (approximate) | 8 times | — |
| Foam Density | 7 lb/ft³ | — |
| Specific Gravity | 0.11 g/cc | 1.14 g/cc |
| Specific Volume | 229 cu. in./lb. | 24.3 cu. in./lb. |
| Color | White | Clear Amber |
| Tensile Strength | — | 7,800 psi |
| Tensile Modulus | — | 370,000 psi |
| Elongation @ Break | — | 6 % |
| Compressive Strength | — | 11,000 psi |
| Compressive Modulus | — | 98,000 psi |
| Flexural Strength | — | 11,850 psi |
| Flexural Modulus | — | 350,000 psi |
| Shrinkage | — | 0.009 in. / in. |
| Heat Deflection Temp | — | 131 °F |
Product Description
FlexFoam-iT!™ 7 FR
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. FlexFoam-iT!™ 7 FR certifies to FMVSS-302 Flame Specification.
› Click here for more FlexFoam-iT!™ flexible foam products.
TASK™ 9
TASK™ 9 Colormatch is a high performance urethane casting resin that features very high compressive strength and tensile strength. TASK™ 9 is clear amber, which makes this plastic very easy to color using SO-Strong™ or IGNITE™ colorants. With a mix ratio of 1A:1B by volume, TASK™ 9 is easy to use and a low mixed viscosity (300 cps) ensures minimal bubble entrapment. Pot life is 7 minutes and cure time is about 60 minutes (depending on mass).