C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 1,400 cps |
| Pot Life | 35 seconds | 6 minutes |
| Handling Time | 60 minutes | 4 hours |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 60 |
| Specific Volume | 229 cu. in./lb. | 26.7 cu. in./lb. |
| Color | White | Translucent Amber |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 7 FR | Econ™ 60 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 1,400 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:88B | 1A:1B |
| Pot Life | 35 seconds | 6 minutes |
| Handling Time | 60 minutes | 4 hours |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 60 |
| Expansion (approximate) | 8 times | — |
| Foam Density | 7 lb/ft³ | — |
| Specific Gravity | 0.11 g/cc | 1.04 g/cc |
| Specific Volume | 229 cu. in./lb. | 26.7 cu. in./lb. |
| Color | White | Translucent Amber |
| Die C Tear Strength | — | 85 pli |
| Tensile Strength | — | 350 psi |
| Elongation @ Break | — | 500 % |
| 100% Modulus | — | 82 psi |
| Shrinkage | — | <0.001 in. / in. |
Product Description
FlexFoam-iT!™ 7 FR
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. FlexFoam-iT!™ 7 FR certifies to FMVSS-302 Flame Specification.
› Click here for more FlexFoam-iT!™ flexible foam products.
Econ™ 60
Econ™ 60 is an economical and fast curing Shore 60A urethane rubber. It has no odor, features a convenient 1A:1B by volume mix ratio and a low viscosity for easy mixing and pouring. Working time is about 6 minutes and handling time is 4 hours at room temperature. Translucent clear amber color(light passes through) makes Econ™ 60 easy to color with SO Strong™, UVO™ or IGNITE™ colorants. Econ™ 60 is used to make limited run production rubber molds, stamping pads, rubber prototype parts, rubber props and pour-in-place gaskets for industrial equipment. It is also suitable for coating fabrics.
FOR COMMERCIAL/INDUSTRIAL USE ONLY