C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 370 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 35 seconds | 12 hours |
| Shore D Hardness | — | 80 |
| Specific Volume | 229 cu. in./lb. | 25.7 cu. in./lb. |
| Color | White | Clear |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 7 FR | EpoxAcast™ 692 Deep Pour | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 370 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 100A:88B | 100A:40B |
| Pot Life | 35 seconds | 12 hours |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | — |
| Shore D Hardness | — | 80 |
| Expansion (approximate) | 8 times | — |
| Foam Density | 7 lb/ft³ | — |
| Specific Gravity | 0.11 g/cc | 1.08 g/cc |
| Specific Volume | 229 cu. in./lb. | 25.7 cu. in./lb. |
| Color | White | Clear |
| Tensile Modulus | — | 378,000 psi |
| Ultimate Tensile | — | 4,585 psi |
| Tensile Elongation | — | 3.1 % |
| Compressive Strength | — | 5,777 psi |
| Compressive Modulus | — | 82,000 psi |
| Flexural Strength | — | 6,780 psi |
| Flexural Modulus | — | 203,000 psi |
| Shrinkage | — | 0.007 in. / in. |
| Heat Deflection Temp | — | 100 °F |
| Index of Refraction at 20°C | — | 1.5372 |
Product Description
FlexFoam-iT!™ 7 FR
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. FlexFoam-iT!™ 7 FR certifies to FMVSS-302 Flame Specification.
› Click here for more FlexFoam-iT!™ flexible foam products.
EpoxAcast™ 692 Deep Pour
EpoxAcast™ 692 Deep Pour is an UV resistant clear casting epoxy resins suitable for a variety of industrial and art related projects requiring a rigid, clear finished casting. EpoxAcast™ 692 features a very low viscosity for easy mixing and minimal bubble entrapment. Castings cure with negligible shrinkage and are very hard and strong. Resin can be colored with UVO™ or IGNITE™ colorants. Cast Magic™ and Glow Worm™ powders can also be added to create amazing casting effects.