C
mpare
T
l
Add Material to Compare
All Technical Data
| EZ-Spray™ 45 | |
|---|---|
| Product Type |
|
| Mixed Viscosity | Sprayable |
| Mix Ratio By Volume | 1A:1B |
| Pot Life | 20 minutes |
| Thin Film Recoat Time | 10 minutes |
| Cure Time | 16 hours |
| Shore A Hardness | 45 |
| Specific Gravity | 1.025 g/cc |
| Specific Volume | 27 cu. in./lb. |
| Color | Light Blue |
| Die C Tear Strength | 100 pli |
| Tensile Strength | 510 psi |
| Elongation @ Break | 375 % |
| Shrinkage | <.001 in. / in. |
Product Description
EZ-Spray™ 45
EZ~Spray™ 45 is a polyurethane rubber for spraying through the EZ~Spray™ Junior Cartridge System. Refer to EZ~Spray™ Junior manual prior to spraying this product. EZ~Spray™ 45 can be sprayed onto vertical surfaces for making molds or is good for making fast molds of large surface areas. After a suitable thickness is attained, EZ~Spray™ 45 cures overnight with negligible shrinkage to a durable mold rubber. Application of a support shell is achieved by spraying Smooth-On’s EZ~Spray™ Plastic over the rubber mold after it has fully cured. EZ~Spray™ 45 is suitable for casting a variety of materials including wax, gypsum, urethane or epoxy resins, concrete, etc.
Minimum Quantity Requirements Apply.