C
mpare
T
l
Key Differences
| Product Type |
|
|
| Pot Life | 45 minutes | 1.5 hours |
| Shore D Hardness | — | 80 |
| Color | Translucent Clear | Grey |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Psycho Paint™ | Free Form™ SCULPT | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Putty | |
| Mix Ratio By Volume | 1A:1B + solvent | 1A:1B |
| Mix Ratio By Weight | 1A:1B + solvent | — |
| Pot Life | 45 minutes | 1.5 hours |
| Tack Free Time | 2 hours | — |
| Cure Time | — | 24 hours |
| Shore D Hardness | — | 80 |
| Specific Gravity | 1.07 g/cc | 1.33 g/cc |
| Specific Volume | — | 20.73 cu. in./lb. |
| Color | Translucent Clear | Grey |
| Elongation @ Break | 1,000 % | — |
| Shrinkage | — | <.001 in. / in. |
| Heat Deflection Temp | — | 150 °F |
Product Description
Psycho Paint™
Psycho Paint™ is a versatile and easy to use platinum silicone paint base developed to help special effects and prosthetic artisans, doll makers, etc. easily create painted-on color effects for their platinum silicone creations. It is a two component translucent clear platinum-cure silicone that is used to make a base for color pigmenting. Once the desired color is attained, Psycho Paint™ is thinned with a solvent. Thin layers of paint can then be applied to a model’s surface (made of Dragon Skin™, Ecoflex™ or other platinum silicone) using an airbrush. It can also be applied by brushing.
Free Form™ SCULPT
Free Form™ SCULPT is a two part sculpt-able epoxy clay that requires no firing and will self-cure in a short time to an extremely hard and durable state with virtually no shrinkage. SCULPT is 30% lighter than similar products and holds vertical surfaces better. Users can sculpt larger, stronger pieces with more control over weight distribution. Free Form™ SCULPT has an ultra fine particle size that gives the user the ability to sculpt finer detail with better precision using tools or shaping by hand.
A mirror-like, gloss finish can be achieved by smoothing SCULPT with water before it cures.