C
mpare
T
l
Key Differences
| Product Type |
|
|
| Pot Life | 45 minutes | 150 minutes |
| Shore D Hardness | — | 55 |
| Specific Gravity | 1.07 g/cc | 0.51 g/cc |
| Color | Translucent Clear | Grey |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Psycho Paint™ | Free Form™ AIR HT | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Dough | |
| Mix Ratio By Volume | 1A:1B + solvent | 2A:1B |
| Mix Ratio By Weight | 1A:1B + solvent | 2A:1B |
| Pot Life | 45 minutes | 150 minutes |
| Tack Free Time | 2 hours | — |
| Cure Time | — | 16 hours |
| Shore D Hardness | — | 55 |
| Specific Gravity | 1.07 g/cc | 0.51 g/cc |
| Specific Volume | — | 54.31 cu. in./lb. |
| Color | Translucent Clear | Grey |
| Elongation @ Break | 1,000 % | — |
| Heat Deflection Temp | — | 300 °F |
| Heat Deflection With Post Cure | — | 400 °F |
Product Description
Psycho Paint™
Psycho Paint™ is a versatile and easy to use platinum silicone paint base developed to help special effects and prosthetic artisans, doll makers, etc. easily create painted-on color effects for their platinum silicone creations. It is a two component translucent clear platinum-cure silicone that is used to make a base for color pigmenting. Once the desired color is attained, Psycho Paint™ is thinned with a solvent. Thin layers of paint can then be applied to a model’s surface (made of Dragon Skin™, Ecoflex™ or other platinum silicone) using an airbrush. It can also be applied by brushing.
Free Form™ AIR HT
Free Form™ AIR HT is a low density, lightweight epoxy putty that offers high temperature resistance to 300°F/149°C when cured at room temperature and 400°F/204°C when heat post cured. This is a low-odor, low shrinkage formula that is easy to use. Free Form™ AIR HT is mixed by hand with a 2A:1B by volume or weight mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. It can be sanded, shaped, drilled, tapped and CNC machined/routered.