C
mpare
T
l
Key Differences
| Product Type |
|
|
| Pot Life | 45 minutes | 15 minutes |
| Shore A Hardness | — | 60 |
| Color | Translucent Clear | Clear Amber |
| Elongation @ Break | 1,000 % | 650 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Psycho Paint™ | PMC™-746 Clear Amber | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,200 cps | |
| Mix Ratio By Volume | 1A:1B + solvent | 2A:1B |
| Mix Ratio By Weight | 1A:1B + solvent | 2A:1B |
| Pot Life | 45 minutes | 15 minutes |
| Tack Free Time | 2 hours | — |
| Cure Time | — | 16 hours |
| Shore A Hardness | — | 60 |
| Specific Gravity | 1.07 g/cc | 1.03 g/cc |
| Specific Volume | — | 26.9 cu. in./lb. |
| Color | Translucent Clear | Clear Amber |
| Die C Tear Strength | — | 100 pli |
| Tensile Strength | — | 700 psi |
| Elongation @ Break | 1,000 % | 650 % |
| 100% Modulus | — | 220 psi |
| Shrinkage | — | < .001 in. / in. |
Product Description
Psycho Paint™
Psycho Paint™ is a versatile and easy to use platinum silicone paint base developed to help special effects and prosthetic artisans, doll makers, etc. easily create painted-on color effects for their platinum silicone creations. It is a two component translucent clear platinum-cure silicone that is used to make a base for color pigmenting. Once the desired color is attained, Psycho Paint™ is thinned with a solvent. Thin layers of paint can then be applied to a model’s surface (made of Dragon Skin™, Ecoflex™ or other platinum silicone) using an airbrush. It can also be applied by brushing.
PMC™-746 Clear Amber
PMC™-746 urethane rubbers were developed to make molds for casting gypsum plasters. Like PMC™-744, this product is well suited for use as a rubber case mold – especially large case molds where extra rigidity is required. Shore hardness is 60A. Because of its durability and moisture resistant properties PMC™-746 urethane rubbers are also used by zoos and museums for a variety of mold-making, display and exhibit applications. They feature a convenient mix ratio (2:1 by weight or volume), and contain no mercury.
Other applications include making plaster block molds, reproducing ornamental plaster (architectural restoration), pre-cast concrete molds, casting waxes, Smooth-On rigid polyurethanes and epoxies and also for making a variety of special effects for movies and theatre.
What’s the Difference? The color of cured original PMC™-746 ranges from amber to blue from batch to batch due to variability in raw materials. Cured PMC™-746 Clear Amber is clear amber in color and will be the same color batch to batch.