Product Type |
|
|
Mixed Viscosity | 23,000 cps | 5,000 cps |
Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
Pot Life | 3.5 hours | 10 minutes |
Cure Time | 24 hours | 30 minutes |
Shore D Hardness | 90 | — |
Shore A Hardness | — | 25 |
Specific Volume | 16.7 cu. in./lb. | 25.16 cu. in./lb. |
Color | Grey | Translucent |
EpoxAcast™ 655 + 103 Hardener | Dragon Skin™ 25 NV | |
---|---|---|
Product Type |
|
|
Mixed Viscosity | 23,000 cps | 5,000 cps |
Mix Ratio By Volume | — | 1A:1B |
Mix Ratio By Weight | 100A:12B | 1A:1B |
Pot Life | 3.5 hours | 10 minutes |
Cure Time | 24 hours | 30 minutes |
Shore D Hardness | 90 | — |
Shore A Hardness | — | 25 |
Specific Gravity | 1.66 g/cc | 1.1 g/cc |
Specific Volume | 16.7 cu. in./lb. | 25.16 cu. in./lb. |
Color | Grey | Translucent |
Die B Tear Strength | — | 139 pli |
Tensile Strength | — | 490 psi |
Tensile Modulus | 2,040,000 psi | — |
Ultimate Tensile | 4,810 psi | — |
Tensile Elongation | 0.54 % | — |
Elongation @ Break | — | 616 % |
100% Modulus | — | 66 psi |
Compressive Strength | 12,500 psi | — |
Compressive Modulus | 125,500 psi | — |
Flexural Strength | 7,660 psi | — |
Flexural Modulus | 1,403,000 psi | — |
Shrinkage | 0.0006 in. / in. | <.001 in. / in. |
Heat Deflection Temp | 135 °F | — |
Useful Temperature (min) | — | -65 °F |
Useful Temperature (max) | — | 450 °F |
Dielectric Strength | — | >350 volts/mil |
Thermal Conductivity | 0.675 W/M*K | — |
EpoxAcast™ 655 (formerly Metalset™ A-30) is a versatile aluminum filled castable epoxy resin that is very hard and strong. It is dimensionally stable, even when mass cast up to 512 in³ / 8,390 cm³.
Dragon Skin™ NV Series silicones are easy to use translucent platinum silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature very low viscosities and vacuum degassing is not required for most applications.
Properly cured Dragon Skin™ 25 NV complies with 21 CFR 177.2600 "Rubber articles intended for repeated use" for use with dry food and aqueous food only. This material has been tested by an independent laboratory to comply with 21 CFR 177.2600(e), water extractable limits for repeated use in aqueous food. This material is not intended for repeated use in contact with fatty foods.