C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 12,000 cps | 8,000 cps |
| Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
| Pot Life | 4 hours | 18 minutes |
| Shore D Hardness | 90 | — |
| Shore A Hardness | — | 00-50 |
| Specific Volume | 16.5 cu. in./lb. | 25.9 cu. in./lb. |
| Color | Grey | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcast™ 655 + HT Hardener | Ecoflex™ 00-50 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 12,000 cps | 8,000 cps |
| Mix Ratio By Volume | — | 1A:1B |
| Mix Ratio By Weight | 100A:8B | 1A:1B |
| Pot Life | 4 hours | 18 minutes |
| Cure Time | Twenty Four Hours Followed By Post Cures | 3 hours |
| Shore D Hardness | 90 | — |
| Shore A Hardness | — | 00-50 |
| Specific Gravity | 1.64 g/cc | 1.07 g/cc |
| Specific Volume | 16.5 cu. in./lb. | 25.9 cu. in./lb. |
| Color | Grey | Translucent |
| Die B Tear Strength | — | 50 pli |
| Tensile Strength | — | 315 psi |
| Tensile Modulus | 7,200,000 psi | — |
| Ultimate Tensile | 6,000 psi | — |
| Tensile Elongation | 0.50 % | — |
| Elongation @ Break | — | 980 % |
| 100% Modulus | — | 12 psi |
| Compressive Strength | 15,700 psi | — |
| Compressive Modulus | 270,000 psi | — |
| Shrinkage | 0.001 in. / in. | <.001 in. / in. |
| Heat Deflection Temp | 225 °F | — |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
| Thermal Conductivity | 0.675 W/M*K | — |
Product Description
EpoxAcast™ 655 + HT Hardener
EpoxAcast™ 655 (formerly Metalset™ A-30) is a versatile aluminum filled castable epoxy resin that is very hard and strong. It is dimensionally stable, even when mass cast up to 512 in³ / 8,390 cm³. Maximum heat resistance is achieved using HT HIGH TEMP hardener (up to 225°F/108°C).
Ecoflex™ 00-50
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.