Product Type |
|
|
Mixed Viscosity | Dough | 650 cps |
Shore D Hardness | 50 | 80 |
Specific Volume | 61.6 cu. in./lb. | 25 cu. in./lb. |
Color | Grey | Clear Yellow |
Free Form™ AIR | EpoxAmite™ 102 | |
---|---|---|
Product Type |
|
|
Mixed Viscosity | Dough | 650 cps |
Mix Ratio By Volume | 1A:1B | 3A:1B |
Mix Ratio By Weight | 1A:1B | 100A:29B |
Pot Life | — | 22 minutes |
Thin Film Working Time | — | 90 minutes |
Cure Time | — | 15 hours |
Shore D Hardness | 50 | 80 |
Specific Gravity | 0.45 g/cc | 1.11 g/cc |
Specific Volume | 61.6 cu. in./lb. | 25 cu. in./lb. |
Color | Grey | Clear Yellow |
Tensile Modulus | — | 450,000 psi |
Ultimate Tensile | — | 8,180 psi |
Tensile Elongation | — | 3.15 % |
Compressive Strength | — | 10,970 psi |
Compressive Modulus | — | 122,000 psi |
Flexural Strength | — | 12,220 psi |
Flexural Modulus | — | 423,000 psi |
Heat Deflection Temp | 140 °F | 120 °F |
Buoyant Force | 10.4 lb/ft³ | — |
Flexural Strength on 6 ply / 10 oz. Laminate | — | 28,500 psi |
Ultimate Tensile on 6 ply / 10 oz. Laminate | — | 26,800 psi |
Free Form™AIR is an extremely lightweight epoxy putty suitable for an infinite variety of industrial and art-related applications. This is a low-odor, low shrinkage putty that is unique, inexpensive and easy to use. Free Form™AIR is mixed by hand with a 1A:1B by volume or weight mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong. Cured Free Form™AIR is so lightweight, it will float in water. It can be sanded, shaped, and drilled. It will readily accept any paint. Free Form can also be color pigmented with UVO™ or Ignite™ colorants.
EpoxAmite™ 102 is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite™ 102 includes the EpoxAmite™ 100 Base and the EpoxAmite™ 102 MEDIUM Hardener. EpoxAmite™ 102 is unfilled, low in viscosity, odorless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.
EpoxAmite™ 102 can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up applications or composite parts. EpoxAmite™ 102 can also be mixed with fillers such as fumed silica for gel coat applications. Urefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.
Applications: Wet Lay-Up Lamination, General Bonding & Repair, Clear Coating - Gel Coating, Barrier Coating, Thin-Section Casting, Water Proofing, Patching & Small Laminates
Also available: EpoxAmite™ 101 FAST SET and EpoxAmite™ 103 SLOW SET