C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | Dough | 15,000 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 90 minutes | 45 minutes |
| Cure Time | 16 hours | 24 hours |
| Shore D Hardness | 85 | — |
| Shore A Hardness | — | 10 |
| Specific Volume | 17.3 cu. in./lb. | 24.1 cu. in./lb. |
| Color | Grey | Light Pink |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Free Form™ Habitat™ Fire Safe™ | Mold Max™ 10 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Dough | 15,000 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:10B |
| Pot Life | 90 minutes | 45 minutes |
| Cure Time | 16 hours | 24 hours |
| Shore D Hardness | 85 | — |
| Shore A Hardness | — | 10 |
| Specific Gravity | 1.44 g/cc | 1.15 g/cc |
| Specific Volume | 17.3 cu. in./lb. | 24.1 cu. in./lb. |
| Color | Grey | Light Pink |
| Die B Tear Strength | — | 100 pli |
| Tensile Strength | — | 473 psi |
| Elongation @ Break | — | 529 % |
| 100% Modulus | — | 35 psi |
| Shrinkage | — | 0.001 in. / in. |
| Heat Deflection Temp | 160 °F | — |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 400 °F |
| Dielectric Constant, 100Hz | — | 3.29 |
| Dielectric Strength | — | 330 volts/mil |
| Dissipation Factor, 100Hz | — | 0.005 |
| Heat Deflection With Post Cure | 212 °F | — |
| Volume Resistance | — | 8.29E+11 ohm |
| Volume Resistivity | — | 5.83E+13 ohm/cm |
Product Description
Free Form™ Habitat™ Fire Safe™
Free Form™ Habitat™ Fire Safe™ epoxy putty is a high density epoxy sculpting putty that is flame rated (E84, Class A). Habitat™ Fire Safe™ is solvent-free and contains no VOC’s. Working time is 90 minutes and cure time is 16 hours at room temperature (73° F/23° C). Epoxy cures to a very hard, flame and heat resistant material that is easily painted. Habitat™ Fire Safe™ does not contain any carcinogens (cancer causing agents).
Mold Max™ 10
Mold Max™ Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max™ Silicones feature Smooth-On’s exclusive “Libra™” catalyst for long library life. Mold Max™ silicones can be pigmented with Silc Pig™ silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.
Vacuum degassing mixed material using a vacuum pump and chamber to remove entrapped air is recommended.