C
mpare
T
l
Vs.
start over
Add Material to Compare
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 7,000 cps | 3,000 cps |
| Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
| Pot Life | 90 minutes | 45 minutes |
| Barcol 935 Hardness | 93 | — |
| Shore A Hardness | — | 00-30 |
| Specific Volume | 18.22 cu. in./lb. | 26.0 cu. in./lb. |
| Color | Black | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcast™ 650 BLACK + 102 Hardener | Ecoflex™ 00-30 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 7,000 cps | 3,000 cps |
| Mix Ratio By Volume | — | 1A:1B |
| Mix Ratio By Weight | 100A:13B | 1A:1B |
| Pot Life | 90 minutes | 45 minutes |
| Cure Time | 4 hours | 4 hours |
| Barcol 935 Hardness | 93 | — |
| Shore A Hardness | — | 00-30 |
| Specific Gravity | 1.52 g/cc | 1.07 g/cc |
| Specific Volume | 18.22 cu. in./lb. | 26.0 cu. in./lb. |
| Color | Black | Translucent |
| Die B Tear Strength | — | 38 pli |
| Tensile Strength | — | 200 psi |
| Tensile Modulus | 1,503,000 psi | — |
| Ultimate Tensile | 6,000 psi | — |
| Tensile Elongation | 0.42 % | — |
| Elongation @ Break | — | 900 % |
| 100% Modulus | — | 10 psi |
| Compressive Strength | 16,350 psi | — |
| Compressive Modulus | 142,600 psi | — |
| Flexural Strength | 5,890 psi | — |
| Flexural Modulus | 710,000 psi | — |
| Shrinkage | 0.001 in. / in. | <.001 in. / in. |
| Heat Deflection Temp | 129 °F | — |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
EpoxAcast™ 650 BLACK + 102 Hardener
EpoxAcast™ 650 Black is a mineral filled general purpose casting epoxy that is low cost and versatile. It features a low mixed viscosity for minimal bubble entrapment.
Ecoflex™ 00-30
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.
Certified Skin Safe - Cured Ecoflex™ 00-30 is skin safe and certified by an independent laboratory.