C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
| Cure Time | 24 hours | 16 hours |
| Shore A Hardness | 60 | 30 |
| Specific Volume | 19.1 cu. in./lb. | 25.7 cu. in./lb. |
| Color | Red | Translucent |
| Die B Tear Strength | 63 pli | 108 pli |
| Tensile Strength | 398 psi | 500 psi |
| Elongation @ Break | 132 % | 364 % |
| 100% Modulus | 331 psi | 86 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Mold Max™ 60 | Dragon Skin™ 30 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 20,000 cps | 20,000 cps |
| Mix Ratio By Volume | — | 1A:1B |
| Mix Ratio By Weight | 100A:3B | 1A:1B |
| Pot Life | 40 minutes | 45 minutes |
| Cure Time | 24 hours | 16 hours |
| Shore A Hardness | 60 | 30 |
| Specific Gravity | 1.45 g/cc | 1.08 g/cc |
| Specific Volume | 19.1 cu. in./lb. | 25.7 cu. in./lb. |
| Color | Red | Translucent |
| Die B Tear Strength | 63 pli | 108 pli |
| Tensile Strength | 398 psi | 500 psi |
| Elongation @ Break | 132 % | 364 % |
| 100% Modulus | 331 psi | 86 psi |
| Shrinkage | 0.0015 in. / in. | <.001 in. / in. |
| Useful Temperature (min) | -65 °F | — |
| Useful Temperature (max) | 560 °F | — |
| Dielectric Constant, 100Hz | 3.4 | — |
| Dielectric Strength | >500 volts/mil | >350 volts/mil |
| Dissipation Factor, 100Hz | 0.02 | — |
| Thermal Conductivity | 0.347 W/M*K | — |
| Volume Resistivity | 9.000000E+14 ohm/cm | — |
Product Description
Mold Max™ 60
Mold Max™ 60 is a Shore 60A tin catalyzed silicone mold rubber formulated for applications requiring high heat resistance (up to 560°F/294°C). It features a low mixed viscosity and cured rubber exhibits very low linear shrinkage. Parts A & B are mixed 100A & 3B by weight. Pot life is 40 minutes and cure time is 24 hours. Applications include making foundry patterns, flat pattern reproductions and casting low-melt metal alloys such as tin and pewter.
Dragon Skin™ 30
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C).