C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | Variable |
| Pot Life | 15 minutes | 2 seconds |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 10 | — |
| Color | Translucent | Off White |
| Elongation @ Break | 663 % | 20 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Dragon Skin™ 10 NV | EZ-Spray™ StyroCoat™ | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | Variable |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | — |
| Pot Life | 15 minutes | 2 seconds |
| Cure Time | 75 minutes | 60 minutes |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 10 | — |
| Specific Gravity | 1.07 g/cc | 1.12 g/cc |
| Specific Volume | 25.8 cu. in./lb. | 24.7 cu. in./lb. |
| Color | Translucent | Off White |
| Die B Tear Strength | 90 pli | — |
| Tensile Strength | 400 psi | — |
| Tensile Modulus | — | 131,000 psi |
| Ultimate Tensile | — | 3,170 psi |
| Elongation @ Break | 663 % | 20 % |
| 100% Modulus | 27 psi | — |
| Compressive Strength | — | 5,000 psi |
| Compressive Modulus | — | 47,600 psi |
| Flexural Strength | — | 6,400 psi |
| Flexural Modulus | — | 205,000 psi |
| Shrinkage | <.001 in. / in. | 0.015 in. / in. |
| Heat Deflection Temp | — | 130 °F |
Product Description
Dragon Skin™ 10 NV
Dragon Skin™ NV Series silicones are easy to use translucent platinum silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature very low viscosities and vacuum degassing is not required for most applications.
EZ-Spray™ StyroCoat™
StyroCoat™ Plastic is a flame rated (E-84) sprayable polyurethane plastic formulated to economically coat a variety of surfaces. Dispensed through Smooth-On’s EZ~Spray™, Jr. cartridge system, the plastic cures in about 2 seconds and can be applied to vertical surfaces without running off. An advantage of the system is that large areas can be covered in a short period of time. Cured plastic is lightweight, flame, impact, and water resistant. It can be sanded for priming and painting. Plastic can also be sprayed into a rubber mold to make fast, impact resistant castings (application of a release agent may be necessary before spraying into the mold). StyroCoat™ Plastic is used for theme design / fabrication applications, making movie set environments, making surfaces water resistant and other industrial applications.