C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | 3,400 cps |
| Cure Time | 75 minutes | 16 hours |
| Shore A Hardness | 10 | 44 |
| Color | Translucent | Beige |
| Tensile Strength | 400 psi | 300 psi |
| Elongation @ Break | 663 % | 400 % |
| 100% Modulus | 27 psi | 90 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Dragon Skin™ 10 NV | PMC™-744 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | 3,400 cps |
| Mix Ratio By Volume | 1A:1B | 2A:1B |
| Mix Ratio By Weight | 1A:1B | 2A:1B |
| Pot Life | 15 minutes | 15 minutes |
| Cure Time | 75 minutes | 16 hours |
| Shore A Hardness | 10 | 44 |
| Specific Gravity | 1.07 g/cc | 1.01 g/cc |
| Specific Volume | 25.8 cu. in./lb. | 27.5 cu. in./lb. |
| Color | Translucent | Beige |
| Die B Tear Strength | 90 pli | — |
| Die C Tear Strength | — | 90 pli |
| Tensile Strength | 400 psi | 300 psi |
| Elongation @ Break | 663 % | 400 % |
| 100% Modulus | 27 psi | 90 psi |
| Shrinkage | <.001 in. / in. | < .001 in. / in. |
Product Description
Dragon Skin™ 10 NV
Dragon Skin™ NV Series silicones are easy to use translucent platinum silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature very low viscosities and vacuum degassing is not required for most applications.
PMC™-744
PMC™-744 has been used for years by mold making professionals to cast plaster, concrete, resins, etc. It is excellent for making molds that are strong, durable and dimensionally stable. Low viscosity ensures fine detail reproduction.