C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | 750 cps |
| Cure Time | 75 minutes | 16 hours |
| Shore A Hardness | 10 | 30 |
| Color | Translucent | Clear |
| Tensile Strength | 400 psi | 725 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Dragon Skin™ 10 NV | Clear Flex™ 30 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | 750 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | 100A:94B |
| Pot Life | 15 minutes | 15 minutes |
| Cure Time | 75 minutes | 16 hours |
| Shore A Hardness | 10 | 30 |
| Specific Gravity | 1.07 g/cc | 1.03 g/cc |
| Specific Volume | 25.8 cu. in./lb. | 26.9 cu. in./lb. |
| Color | Translucent | Clear |
| Die B Tear Strength | 90 pli | — |
| Die C Tear Strength | — | 54 pli |
| Tensile Strength | 400 psi | 725 psi |
| Elongation @ Break | 663 % | 675 % |
| 100% Modulus | 27 psi | — |
| Shrinkage | <.001 in. / in. | 0.002 in. / in. |
| Dielectric Constant, 100Hz | — | 6.62 |
| Dielectric Strength | — | 474 volts/mil |
| Dissipation Factor, 100Hz | — | 0.103 |
| Index of Refraction at 20°C | — | 1.48822 |
| Index of Refraction at 25°C | — | 1.48649 |
| Volume Resistance | — | >7.646E+13 ohm |
| Volume Resistivity | — | >6.014E+15 ohm/cm |
Product Description
Dragon Skin™ 10 NV
Dragon Skin™ NV Series silicones are easy to use translucent platinum silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature very low viscosities and vacuum degassing is not required for most applications.
Clear Flex™ 30
Clear Flex™ 30 is a mercury-free and phthalate-free water white clear urethane liquid rubber compound designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring. Clear Flex™ 30 cures at room temperature with negligible shrinkage. Cured castings are clear, flexible and UV Resistant. Vibrant colors and color effects are achieved by adding pigments. Applications include making model reproductions, decorative cast pieces, special effects, prototype parts.
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.