C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 30,000 cps | 20,000 cps |
| Cure Time | 16 hours | 24 hours |
| Shore A Hardness | 60 | 15 |
| Color | Green | Translucent |
| Tensile Strength | 650 psi | 490 psi |
| Elongation @ Break | 270 % | 600 % |
| 100% Modulus | 280 psi | 35 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Smooth‑Sil™ 960 | Mold Max™ 15T | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 30,000 cps | 20,000 cps |
| Mix Ratio By Weight | 100A:10B | 100A:10B |
| Pot Life | 45 minutes | 45 minutes |
| Cure Time | 16 hours | 24 hours |
| Shore A Hardness | 60 | 15 |
| Specific Gravity | 1.25 g/cc | 1.08 g/cc |
| Specific Volume | 22.2 cu. in./lb. | 25.6 cu. in./lb. |
| Color | Green | Translucent |
| Die B Tear Strength | 110 pli | 94 pli |
| Tensile Strength | 650 psi | 490 psi |
| Elongation @ Break | 270 % | 600 % |
| 100% Modulus | 280 psi | 35 psi |
| Shrinkage | <.001 in. / in. | 0.002 in. / in. |
| Useful Temperature (min) | -65 °F | -65 °F |
| Useful Temperature (max) | 450 °F | 400 °F |
Product Description
Smooth‑Sil™ 960
Smooth-Sil™ 960 is a Shore 60A platinum cure silicone rubber developed for a variety of industrial applications. Compared to other 60A platinum silicones, Smooth-Sil™ 960 has a relatively low viscosity and is easy to mix, de-air and pour. Silicone cures in 16 hours with negligible shrinkage to a firm rubber with high tensile and tear strength.
Smooth-Sil™ 960 offers good chemical and heat resistance, making this a good choice for production casting of resins and expanding foams. Because of its firmness, Smooth-Sil™ 960 molds are also used for spin casting. It is also used for embedding and electrical applications. Smooth-Sil™ 960 is suitable for food related applications.
Note: This product will not cure against surfaces containing sulfur, even when sealed.
Mold Max™ 15T
Mold Max™ 15T silicone is a water white translucent tin cured silicone rubber compound that has exceptional tear strength and working properties. It features Smooth-On’s “Libra™” catalyst for long library life. Mixed 100A:10B by weight, vacuum degassing is recommended for de-airing. Rubber cures overnight at room temperature. Mold Max™ ‘T’ silicones can be thickened with Thi-Vex™ thickener for brush-on application and effects.