C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 300 cps | Putty |
| Pot Life | 3 minutes | 4 minutes |
| Shore D Hardness | 57 | — |
| Shore A Hardness | — | 38 |
| Color | Translucent White | Light Purple |
| Tensile Strength | 2,420 psi | 520 psi |
| Elongation @ Break | 100 % | 430 % |
| Shrinkage | 0.012 in. / in. | 0.001 in. / in. |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Smooth-Cast™ 57D | Equinox™ 38 MEDIUM | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 300 cps | Putty |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:93B | 1A:1B |
| Pot Life | 3 minutes | 4 minutes |
| Cure Time | 30 minutes | 30 minutes |
| Shore D Hardness | 57 | — |
| Shore A Hardness | — | 38 |
| Specific Gravity | 1.05 g/cc | 1.25 g/cc |
| Specific Volume | 26.4 cu. in./lb. | 22.2 cu. in./lb. |
| Color | Translucent White | Light Purple |
| Die B Tear Strength | — | 140 pli |
| Tensile Strength | 2,420 psi | 520 psi |
| Elongation @ Break | 100 % | 430 % |
| 100% Modulus | — | 119 psi |
| Shrinkage | 0.012 in. / in. | 0.001 in. / in. |
Product Description
Smooth-Cast™ 57D
Smooth-Cast™ 57D is a semi-rigid urethane plastic that offers a gradual cure profile (does not snap cure), making it suitable for machine or hand rotational casting.
Use For Rotational Casting - Once poured into a suitable rubber mold configuration, the mold can be rotated so that the resin mixture gradually coats the inside of the mold cavity. After an adequate wall thickness is attained inside the mold, the result is a cured hollow casting that is semi-rigid and highly impact resistant.
Use as a Casting Resin – Smooth-Cast™ 57D can also be used as a casting resin for making solid, semi-rigid castings that are tough and durable.
Mix ratio is 1A:1B by volume. Working time is 3 minutes, demold time is 30 minutes and full cure properties are attained after 24 hours. Color is white translucent and the material is very easy to color with SO-Strong™, UVO™ or Ignite™ colorants. Cured resin is also easy to paint with acrylic paints or UreCoat™ flexible coating for applications requiring thick, durable finishes.
› Click here for more Smooth-Cast™ resin products.
Equinox™ 38 MEDIUM
Equinox™ Silicone Putty Products are new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand to a variety of surfaces. Equinox™ Putty is mixed in equal amounts (1A:1B) by volume.