Compare Tool

remove

Mold Max™ 10T

Mold Max™ 10T vs. Dragon Skin™ 10 FAST

Translucent Silicone Rubber

› View Product

Vs.
remove

Dragon Skin™ 10 FAST

Mold Max™ 10T vs. Dragon Skin™ 10 FASTMold Max™ 10T

Addition Cure Silicone Rubber Compound

› View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Tin Cure
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
Mixed Viscosity14,000 cps23,000 cps
Mix Ratio By VolumeN/A (gram scale required)1A:1B
Pot Life45 minutes8 minutes
Cure Time24 hours75 minutes
Elongation @ Break586 %1,000 %
100% Modulus29 psi22 psi
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Mold Max™ 10TDragon Skin™ 10 FAST
Product Type
  • Silicone Rubber - Tin Cure
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
Mixed Viscosity14,000 cps23,000 cps
Mix Ratio By Volume—1A:1B
Mix Ratio By Weight100A:10B1A:1B
Pot Life45 minutes8 minutes
Cure Time24 hours75 minutes
Shore A Hardness1010
Specific Gravity1.09 g/cc1.07 g/cc
Specific Volume25.4 cu. in./lb.25.8 cu. in./lb.
ColorTranslucentTranslucent
Die B Tear Strength87 pli102 pli
Tensile Strength405 psi475 psi
Elongation @ Break586 %1,000 %
100% Modulus29 psi22 psi
Shrinkage0.0025 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F-65 °F
Useful Temperature (max)400 °F450 °F
Dielectric Strength—>350 volts/mil

Product Description

Mold Max™ 10T

Mold Max™ 10T silicone is a water white translucent tin cured silicone rubber compound that has exceptional tear strength and working properties. It features Smooth-On’s “Libra™” catalyst for long library life. Mixed 100A:10B by weight, vacuum degassing is recommended for de-airing. Rubber cures overnight at room temperature. Mold Max™ ‘T’ silicones can be thickened with Thi‑Vex™ thickener for brush-on application and effects.

›Read More

Dragon Skin™ 10 FAST

Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)

›Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›