Compare Tool

remove

Free Form™ AIR HT

EpoxAcast™ 670 HT vs. Free Form™ AIR HT

High Temperature Epoxy Dough

 View Product

Vs.
remove

EpoxAcast™ 670 HT

EpoxAcast™ 670 HT vs. Free Form™ AIR HTFree Form™ AIR HT

High Temp Castable Epoxy Resin

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Epoxy Putties
  • Epoxy Casting and Laminating Resins
Mixed ViscosityDough6,000 cps
Mix Ratio By Volume2A:1BN/A (gram scale required)
Shore D Hardness5590
Specific Volume54.31 cu. in./lb.20.51 cu. in./lb.
ColorGreyBeige
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Free Form™ AIR HTEpoxAcast™ 670 HT
Product Type
  • Epoxy Putties
  • Epoxy Casting and Laminating Resins
Mixed ViscosityDough6,000 cps
Mix Ratio By Volume2A:1B
Mix Ratio By Weight2A:1B100A:16B
Pot Life150 minutes3 hours
Cure Time16 hours

Twenty Four Hours Followed By Post Cures

Shore D Hardness5590
Specific Gravity0.51 g/cc1.15 g/cc
Specific Volume54.31 cu. in./lb.20.51 cu. in./lb.
ColorGreyBeige
Tensile Strength4,500 psi
Tensile Modulus332,000 psi
Tensile Elongation0.65 %
Compressive Strength13,000 psi
Compressive Modulus101,400 psi
Flexural Strength11,000 psi
Flexural Modulus254,000 psi
Shrinkage0.002 in. / in.
Heat Deflection Temp300 °F350 °F
Heat Deflection With Post Cure400 °F

Product Description

Free Form™ AIR HT

Free Form™ AIR HT is a low density, lightweight epoxy putty that offers high temperature resistance to 300°F/149°C when cured at room temperature and 400°F/204°C when heat post cured. This is a low-odor, low shrinkage formula that is easy to use. Free Form™ AIR HT is mixed by hand with a 2A:1B by volume or weight mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. It can be sanded, shaped, drilled, tapped and CNC machined/routered.

Read More

EpoxAcast™ 670 HT

EpoxAcast™ 670 HT is an easy-to-use epoxy casting compound that offers high heat resistance up to 350°F/177°C (post cure required). EpoxAcast™ 670 HT is ideal for making vacuum forming and thermoforming molds, creating foundry patterns, forming dies & fixtures, hard rollers, industrial parts and high impact tools. EpoxAcast™ 670 HT is also suitable for encapsulation applications or for use as a high temperature epoxy for bonding a variety of surfaces.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›