Compare Tool

remove

Free Form™ AIR HT

Dragon Skin™ 10 NV vs. Free Form™ AIR HT

High Temperature Epoxy Dough

 View Product

Vs.
remove

Dragon Skin™ 10 NV

Dragon Skin™ 10 NV vs. Free Form™ AIR HTFree Form™ AIR HT

Low Viscosity, High Performance Platinum Silicone

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Epoxy Putties
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
Mixed ViscosityDough6,000 cps
Pot Life150 minutes15 minutes
Cure Time16 hours75 minutes
Shore D Hardness55
Shore A Hardness10
Specific Volume54.31 cu. in./lb.25.8 cu. in./lb.
ColorGreyTranslucent
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Free Form™ AIR HTDragon Skin™ 10 NV
Product Type
  • Epoxy Putties
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
Mixed ViscosityDough6,000 cps
Mix Ratio By Volume2A:1B1A:1B
Mix Ratio By Weight2A:1B1A:1B
Pot Life150 minutes15 minutes
Cure Time16 hours75 minutes
Shore D Hardness55
Shore A Hardness10
Specific Gravity0.51 g/cc1.07 g/cc
Specific Volume54.31 cu. in./lb.25.8 cu. in./lb.
ColorGreyTranslucent
Die B Tear Strength90 pli
Tensile Strength400 psi
Elongation @ Break663 %
100% Modulus27 psi
Shrinkage<.001 in. / in.
Heat Deflection Temp300 °F
Heat Deflection With Post Cure400 °F

Product Description

Free Form™ AIR HT

Free Form™ AIR HT is a low density, lightweight epoxy putty that offers high temperature resistance to 300°F/149°C when cured at room temperature and 400°F/204°C when heat post cured. This is a low-odor, low shrinkage formula that is easy to use. Free Form™ AIR HT is mixed by hand with a 2A:1B by volume or weight mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. It can be sanded, shaped, drilled, tapped and CNC machined/routered.

Read More

Dragon Skin™ 10 NV

Dragon Skin™ NV Series silicones are easy to use translucent platinum silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature very low viscosities and vacuum degassing is not required for most applications.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›