C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 3,400 cps |
| Mix Ratio By Volume | 1A:2B | N/A (gram scale required) |
| Pot Life | 2 minutes | 20 minutes |
| Cure Time | 4 hours | 15 hours |
| Shore D Hardness | — | 83 |
| Specific Volume | 115 cu. in./lb. | 22.2 cu. in./lb. |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 15 Tuff Stuff SLOW | EpoxAmite™ WHITE 101 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 3,400 cps |
| Mix Ratio By Volume | 1A:2B | — |
| Mix Ratio By Weight | 100A:185B | 100A:20B |
| Pot Life | 2 minutes | 20 minutes |
| Thin Film Working Time | — | 45 minutes |
| Handling Time | 90 minutes | — |
| Cure Time | 4 hours | 15 hours |
| Shore D Hardness | — | 83 |
| Expansion (approximate) | 4 times | — |
| Foam Density | 15 lb/ft³ | — |
| Specific Gravity | 0.24 g/cc | 1.25 g/cc |
| Specific Volume | 115 cu. in./lb. | 22.2 cu. in./lb. |
| Color | White | White |
| Tensile Modulus | — | 627,000 psi |
| Ultimate Tensile | — | 5,130 psi |
| Tensile Elongation | — | 0.8 % |
| Compressive Strength | — | 16,290 psi |
| Compressive Modulus | — | 116,000 psi |
| Flexural Strength | — | 8,770 psi |
| Flexural Modulus | — | 465,000 psi |
| Heat Deflection Temp | — | 136 °F |
| Flexural Strength on 6 ply / 10 oz. Laminate | — | 29,000 psi |
| Ultimate Tensile on 6 ply / 10 oz. Laminate | — | 24,700 psi |
Product Description
FlexFoam-iT!™ 15 Tuff Stuff SLOW
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. FlexFoam-iT!™ foams are also used as repair materials for seats, cushions and archery targets. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. The lower the number, the more the foam expands.
EpoxAmite™ WHITE 101
EpoxAmite™ White Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite™ White Laminating System is odorless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.
EpoxAmite™ White Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up applications or composite parts. EpoxAmite™ White Resin can also be mixed with fillers such as fumed silica for gel coat applications. Urefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.