Compare Tool

remove

Matrix Dryve™

PC-3™ vs. Matrix Dryve™

All-powder polymer modified gypsum system

 View Product

Vs.
remove

PC-3™

PC-3™ vs. Matrix Dryve™Matrix Dryve™

Laboratory Tabletop Epoxy Adhesive

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Flame Rated Materials
  • Polymer Modifiers for Concrete and Gypsum
  • Adhesives
Mixed ViscosityVariablePaste
Cure Time90 minutes24 hours
Barcol 935 Hardness75
ColorWhiteBlack
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Matrix Dryve™PC-3™
Product Type
  • Flame Rated Materials
  • Polymer Modifiers for Concrete and Gypsum
  • Adhesives
Mixed ViscosityVariablePaste
Mix Ratio By Volume3 Parts Powder : 1 Part Water By Volume1A:1B
Mix Ratio By Weight100 Parts Powder : 27 Parts Water by Weight1A:1B
Pot Life20 minutes20 minutes
Handling Time2 hours
Cure Time90 minutes24 hours
Barcol 935 Hardness75
Specific Gravity1.4 g/cc
Specific Volume17.45 cu. in./lb.20 cu. in./lb.
ColorWhiteBlack
Tensile Strength3300 - 5500 psi3,000 psi
Compressive Strength6500 - 9500 psi
Flexural Strength5,000 psi
Shrinkage0.003 in. / in.
Useful Temperature (max)200 °F
Compressive Yield Strength5,000 psi
Density99 lbs lb/ft³
Flexural Strength on 6 ply / 10 oz. Laminate7500 - 9800 psi
Freeze / Thaw Resistance300 cycles
Impact Resistance175 in lb / in²
Water Absorption0.5 ‰ after 24 hour water soak

Product Description

Matrix Dryve™

Matrix Dryve™ is a versatile all-powder polymer modified gypsum system that has superior physical and performance properties compared to regular gypsum products. It is an “all-powder” alternative to our original Matrix™ NEO powder/liquid system.

Read More

PC-3™

Smooth-On PC-3™ Laboratory Table Top Cement is a two-component, black epoxy resin compound designed to join, bond and caulk sections of laboratory counters and tables. This epoxy resin cement is heavily filled and will adhere to vertical surfaces without sagging. It cures at room temperature with extremely low shrinkage.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›