Compare Tool

remove

Ecoflex™ 00-45 Near Clear™

Alja-Safe™ vs. Ecoflex™ 00-45 Near Clear™

Super-Soft, Nearly Clear Silicone Rubber

 View Product

Vs.
remove

Alja-Safe™

Alja-Safe™ vs. Ecoflex™ 00-45 Near Clear™Ecoflex™ 00-45 Near Clear™

Crystalline Silica-Free Alginate

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
  • Lifecasting Materials
  • Skin Safe FX Materials
Mixed Viscosity2,000 cpsVariable
Pot Life45 minutes5 minutes
Cure Time4 hours8 minutes
Shore A Hardness00-45
ColorWater Clear TranslucentLight Purple
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Ecoflex™ 00-45 Near Clear™Alja-Safe™
Product Type
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
  • Lifecasting Materials
  • Skin Safe FX Materials
Mixed Viscosity2,000 cpsVariable
Mix Ratio By Volume1A:1B1 Part Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder
Mix Ratio By Weight4 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder
Pot Life45 minutes5 minutes
Cure Time4 hours8 minutes
Shore A Hardness00-45
Specific Gravity1.06 g/cc
Specific Volume26.2 cu. in./lb.26 cu. in./lb.
ColorWater Clear TranslucentLight Purple
Die B Tear Strength50 pli
Tensile Strength315 psi
Elongation @ Break980 %
100% Modulus12 psi
Shrinkage<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 00-45 Near Clear™

Ecoflex™ 00-45 Near Clear™ is a very soft, platinum silicone that is clearer than other Ecoflex™ silicones. Versatile and easy to use, Ecoflex™ 00-45 Near Clear™ rubber is mixed 1A:1B by weight or volume and cures at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured material is skin safe and certified by an independent laboratory.

Read More

Alja-Safe™

Safe to use Alja-Safe™ is the world’s first alginate molding powder that does not contain crystalline silica (a known carcinogen). Alja-Safe™ is perfect for making single-use molds of the face, hands and other body parts. It captures detail better than other alginates, giving you a more accurate reproduction of your original.

Certified Skin Safe - Material is skin safe and certified by an independent laboratory.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›