C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 370 cps | Variable |
| Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
| Pot Life | 12 hours | 2 seconds |
| Color | Clear | Off White |
| Tensile Modulus | 378,000 psi | 100,000 psi |
| Ultimate Tensile | 4,585 psi | 2,650 psi |
| Compressive Modulus | 82,000 psi | 45,000 psi |
| Flexural Strength | 6,780 psi | 5,000 psi |
| Flexural Modulus | 203,000 psi | 153,000 psi |
| Shrinkage | 0.007 in. / in. | 0.016 in. / in. |
| Heat Deflection Temp | 100 °F | 130 °F |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcast™ 692 Deep Pour | EZ-Spray™ Plastic | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 370 cps | Variable |
| Mix Ratio By Volume | — | 1A:1B |
| Mix Ratio By Weight | 100A:40B | — |
| Pot Life | 12 hours | 2 seconds |
| Cure Time | — | 3 hours |
| Shore D Hardness | 80 | 75 |
| Specific Gravity | 1.08 g/cc | 1.11 g/cc |
| Specific Volume | 25.7 cu. in./lb. | 25 cu. in./lb. |
| Color | Clear | Off White |
| Tensile Modulus | 378,000 psi | 100,000 psi |
| Ultimate Tensile | 4,585 psi | 2,650 psi |
| Tensile Elongation | 3.1 % | — |
| Elongation @ Break | — | 10 % |
| Compressive Strength | 5,777 psi | 5,000 psi |
| Compressive Modulus | 82,000 psi | 45,000 psi |
| Flexural Strength | 6,780 psi | 5,000 psi |
| Flexural Modulus | 203,000 psi | 153,000 psi |
| Shrinkage | 0.007 in. / in. | 0.016 in. / in. |
| Heat Deflection Temp | 100 °F | 130 °F |
| Index of Refraction at 20°C | 1.5372 | — |
Product Description
EpoxAcast™ 692 Deep Pour
EpoxAcast™ 692 Deep Pour is an UV resistant clear casting epoxy resins suitable for a variety of industrial and art related projects requiring a rigid, clear finished casting. EpoxAcast™ 692 features a very low viscosity for easy mixing and minimal bubble entrapment. Castings cure with negligible shrinkage and are very hard and strong. Resin can be colored with UVO™ or IGNITE™ colorants. Cast Magic™ and Glow Worm™ powders can also be added to create amazing casting effects.
EZ-Spray™ Plastic
EZ~Spray™ Plastic is an improved version of our original sprayable polyurethane plastic compound. With higher impact resistance, this new spray plastic was specifically formulated to be mixed and sprayed via Smooth-On’s EZ~Spray™ Jr. Spray System. EZ~Spray™ Plastic is versatile and can be sprayed over a rubber mold to create “mother molds” or support shells. It can also be sprayed or meter mixed into rubber molds as a fast setting casting resin. Cured plastic is lightweight, tough and durable. EZ~Spray™ Plastic has a fast gel time for vertical surface application. Material cures in about 3 hours (depending on mass). Refer to the EZ~Spray™ Jr. Video Manual before spraying plastic.
Minimum Quantity Requirements Apply.