C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 370 cps | 4,250 cps |
| Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
| Pot Life | 12 hours | 30 minutes |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 30 |
| Color | Clear | Lavender |
| Shrinkage | 0.007 in. / in. | 0.0025 in. / in. |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcast™ 692 Deep Pour | OOMOO™ 30 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 370 cps | 4,250 cps |
| Mix Ratio By Volume | — | 1A:1B |
| Mix Ratio By Weight | 100A:40B | 100A:130B |
| Pot Life | 12 hours | 30 minutes |
| Cure Time | — | 6 hours |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 30 |
| Specific Gravity | 1.08 g/cc | 1.34 g/cc |
| Specific Volume | 25.7 cu. in./lb. | 20.6 cu. in./lb. |
| Color | Clear | Lavender |
| Die B Tear Strength | — | 40 pli |
| Tensile Strength | — | 240 psi |
| Tensile Modulus | 378,000 psi | — |
| Ultimate Tensile | 4,585 psi | — |
| Tensile Elongation | 3.1 % | — |
| Elongation @ Break | — | 250 % |
| 100% Modulus | — | 100 psi |
| Compressive Strength | 5,777 psi | — |
| Compressive Modulus | 82,000 psi | — |
| Flexural Strength | 6,780 psi | — |
| Flexural Modulus | 203,000 psi | — |
| Shrinkage | 0.007 in. / in. | 0.0025 in. / in. |
| Heat Deflection Temp | 100 °F | — |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 400 °F |
| Index of Refraction at 20°C | 1.5372 | — |
Product Description
EpoxAcast™ 692 Deep Pour
EpoxAcast™ 692 Deep Pour is an UV resistant clear casting epoxy resins suitable for a variety of industrial and art related projects requiring a rigid, clear finished casting. EpoxAcast™ 692 features a very low viscosity for easy mixing and minimal bubble entrapment. Castings cure with negligible shrinkage and are very hard and strong. Resin can be colored with UVO™ or IGNITE™ colorants. Cast Magic™ and Glow Worm™ powders can also be added to create amazing casting effects.
OOMOO™ 30
No Vacuuming – No Scale – Easy To Use . . . OOMOO™ 30 is an easy to use tin cure silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). It has low viscosity for easy mixing and pouring . . . vacuum degassing is not necessary. This product cures at room temperature with negligible shrinkage. OOMOO™ 30 has a 30-minute pot life, with a six-hour cure time.
For The Novice Mold Maker - OOMOO™ silicones do not have great tear strength. They are good for making simple one- or two piece block molds. If you require a high-tear strength silicone, Mold Max™ silicones are recommended.
OOMOO™ 30 is suitable for a variety of art-related and industrial applications including making one and two-piece block molds for sculpture and prototype reproduction, casting plaster, resins and wax. OOMOO™ silicones are also suitable for electrical potting and encapsulation applications.