C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 370 cps | 1,800 cps |
| Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
| Pot Life | 12 hours | 50 minutes |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 60 |
| Color | Clear | Off White |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcast™ 692 Deep Pour | ReoFlex™ 60 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 370 cps | 1,800 cps |
| Mix Ratio By Volume | — | 1A:1B |
| Mix Ratio By Weight | 100A:40B | 1A:1B |
| Pot Life | 12 hours | 50 minutes |
| Cure Time | — | 16 hours |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 60 |
| Specific Gravity | 1.08 g/cc | 1.04 g/cc |
| Specific Volume | 25.7 cu. in./lb. | 26.7 cu. in./lb. |
| Color | Clear | Off White |
| Die C Tear Strength | — | 132 pli |
| Tensile Strength | — | 782 psi |
| Tensile Modulus | 378,000 psi | — |
| Ultimate Tensile | 4,585 psi | — |
| Tensile Elongation | 3.1 % | — |
| Elongation @ Break | — | 581 % |
| 100% Modulus | — | 256 psi |
| Compressive Strength | 5,777 psi | — |
| Compressive Modulus | 82,000 psi | — |
| Flexural Strength | 6,780 psi | — |
| Flexural Modulus | 203,000 psi | — |
| Shrinkage | 0.007 in. / in. | <.001 in. / in. |
| Heat Deflection Temp | 100 °F | — |
| Index of Refraction at 20°C | 1.5372 | — |
Product Description
EpoxAcast™ 692 Deep Pour
EpoxAcast™ 692 Deep Pour is an UV resistant clear casting epoxy resins suitable for a variety of industrial and art related projects requiring a rigid, clear finished casting. EpoxAcast™ 692 features a very low viscosity for easy mixing and minimal bubble entrapment. Castings cure with negligible shrinkage and are very hard and strong. Resin can be colored with UVO™ or IGNITE™ colorants. Cast Magic™ and Glow Worm™ powders can also be added to create amazing casting effects.
ReoFlex™ 60
ReoFlex™ urethane rubbers offer superior physical and performance properties for production casting of wax, plasters, and resins. ReoFlex™ urethanes are available in 20A, 30A, 40A, 50A and 60A Shore hardnesses and feature convenient one-to-one by volume mix ratios. Vacuum degassing is not necessary and ReoFlex™ rubbers cure with negligible shrinkage to a durable rubber that will last in production. ReoFlex™ “Wet” rubbers will shrink somewhat over time vs. “Dry” formulations.
ReoFlex™ mold rubbers are used for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. Vibrant colors can be achieved by adding So-Strong™ Color Tints, available from Smooth-On.
Casting Concrete? Look into the VytaFlex™ series of urethane mold rubbers. VytaFlex™ urethanes were formulated specifically for casting concrete / pigmented concrete and feature Smooth-On’s exclusive ‘V-Polymer™’ technology.
FOR COMMERCIAL/INDUSTRIAL USE ONLY