Compare Tool

remove

Dragon Skin™ 10 FAST

EZ-Brush™ Vac Bag Silicone vs. Dragon Skin™ 10 FAST

Addition Cure Silicone Rubber Compound

 View Product

Vs.
remove

EZ-Brush™ Vac Bag Silicone

EZ-Brush™ Vac Bag Silicone vs. Dragon Skin™ 10 FASTDragon Skin™ 10 FAST

Brushable Platinum Silicone Rubber

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
  • Silicone Rubber - Platinum Cure
Pot Life8 minutes30 minutes
Cure Time75 minutes3.5 hours
Shore A Hardness1020
ColorTranslucentTranslucent Green
Elongation @ Break1,000 %364 %
100% Modulus22 psi46 psi
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Dragon Skin™ 10 FASTEZ-Brush™ Vac Bag Silicone
Product Type
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
  • Silicone Rubber - Platinum Cure
Mixed Viscosity23,000 cps20,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B1A:1B
Pot Life8 minutes30 minutes
Cure Time75 minutes3.5 hours
Shore A Hardness1020
Specific Gravity1.07 g/cc1.08 g/cc
Specific Volume25.8 cu. in./lb.25.7 cu. in./lb.
ColorTranslucentTranslucent Green
Die B Tear Strength102 pli120 pli
Tensile Strength475 psi550 psi
Elongation @ Break1,000 %364 %
100% Modulus22 psi46 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F
Dielectric Strength>350 volts/mil

Product Description

Dragon Skin™ 10 FAST

Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)

Read More

EZ-Brush™ Vac Bag Silicone

EZ-Brush™ Vac Bag Silicone is a brushable platinum cure silicone developed especially for making high performance, reusable vacuum bags. EZ-Brush™ Vac Bag Silicone is easy to mix and apply. Mix ratio is 1A:1B by volume and rubber can be applied with a brush or spatula to vertical surfaces without sagging.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›