Compare Tool

remove

Dragon Skin™ 10 FAST

Dragon Skin™ 10 FAST vs. Ecoflex™ 00-10

Addition Cure Silicone Rubber Compound

 View Product

Vs.
remove

Ecoflex™ 00-10

Dragon Skin™ 10 FAST vs. Ecoflex™ 00-10Dragon Skin™ 10 FAST

Super-Soft, Addition Cure Silicone Rubber

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
Mixed Viscosity23,000 cps14,000 cps
Pot Life8 minutes30 minutes
Cure Time75 minutes4 hours
Shore A Hardness1000-10
Die B Tear Strength102 pli22 pli
Tensile Strength475 psi120 psi
100% Modulus22 psi8 psi
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Dragon Skin™ 10 FASTEcoflex™ 00-10
Product Type
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
Mixed Viscosity23,000 cps14,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B1A:1B
Pot Life8 minutes30 minutes
Cure Time75 minutes4 hours
Shore A Hardness1000-10
Specific Gravity1.07 g/cc1.04 g/cc
Specific Volume25.8 cu. in./lb.26.6 cu. in./lb.
ColorTranslucentTranslucent
Die B Tear Strength102 pli22 pli
Tensile Strength475 psi120 psi
Elongation @ Break1,000 %800 %
100% Modulus22 psi8 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F-65 °F
Useful Temperature (max)450 °F450 °F
Dielectric Strength>350 volts/mil

Product Description

Dragon Skin™ 10 FAST

Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)

Read More

Ecoflex™ 00-10

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›