Product Type |
|
|
Mixed Viscosity | 23,000 cps | 600 cps |
Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
Pot Life | 8 minutes | 2 hours |
Cure Time | 75 minutes | 48 hours |
Shore D Hardness | — | 80 |
Shore A Hardness | 10 | — |
Color | Translucent | Clear |
Tensile Strength | 475 psi | 3,500 psi |
Elongation @ Break | 1,000 % | 10 % |
Dragon Skin™ 10 FAST | Crystal Clear™ 204 | |
---|---|---|
Product Type |
|
|
Mixed Viscosity | 23,000 cps | 600 cps |
Mix Ratio By Volume | 1A:1B | — |
Mix Ratio By Weight | 1A:1B | 100A:90B |
Pot Life | 8 minutes | 2 hours |
Cure Time | 75 minutes | 48 hours |
Shore D Hardness | — | 80 |
Shore A Hardness | 10 | — |
Specific Gravity | 1.07 g/cc | 1.036 g/cc |
Specific Volume | 25.8 cu. in./lb. | 26.7 cu. in./lb. |
Color | Translucent | Clear |
Die B Tear Strength | 102 pli | — |
Tensile Strength | 475 psi | 3,500 psi |
Tensile Modulus | — | 86,240 psi |
Elongation @ Break | 1,000 % | 10 % |
100% Modulus | 22 psi | — |
Compressive Strength | — | 4,200 psi |
Compressive Modulus | — | 44,000 psi |
Flexural Strength | — | 5,390 psi |
Flexural Modulus | — | 183,200 psi |
Shrinkage | <.001 in. / in. | 0.002 in. / in. |
Heat Deflection Temp | — | 120 °F |
Useful Temperature (min) | -65 °F | — |
Useful Temperature (max) | 450 °F | — |
Dielectric Strength | >350 volts/mil | — |
Index of Refraction at 20°C | — | 1.49888 |
Index of Refraction at 25°C | — | 1.49830 |
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)
Crystal Clear™ 204 is a water white clear and made specifically for applications that require clarity. These rigid urethane casting resins differ only in working and demold times. Low viscosity ensures easy mixing and pouring. Crystal Clear™ resins cure at room temperature* with negligible shrinkage.
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.