C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 23,000 cps | 11,000 cps |
| Pot Life | 45 minutes | 3 minutes |
| Cure Time | 7 hours | 20 minutes |
| Shore A Hardness | 10 | 20 |
| Color | Translucent | Translucent Green |
| Elongation @ Break | 1,000 % | 470 % |
| 100% Modulus | 22 psi | 47 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Dragon Skin™ 10 SLOW | EZ-Spray™ Silicone 20 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 23,000 cps | 11,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | — |
| Pot Life | 45 minutes | 3 minutes |
| Cure Time | 7 hours | 20 minutes |
| Shore A Hardness | 10 | 20 |
| Specific Gravity | 1.07 g/cc | 1.08 g/cc |
| Specific Volume | 25.8 cu. in./lb. | 25.6 cu. in./lb. |
| Color | Translucent | Translucent Green |
| Die B Tear Strength | 102 pli | 100 pli |
| Tensile Strength | 475 psi | 495 psi |
| Elongation @ Break | 1,000 % | 470 % |
| 100% Modulus | 22 psi | 47 psi |
| Shrinkage | <.001 in. / in. | <.001 in. / in. |
| Useful Temperature (min) | -65 °F | -65 °F |
| Useful Temperature (max) | 450 °F | 500 °F |
| Dielectric Strength | >350 volts/mil | — |
Product Description
Dragon Skin™ 10 SLOW
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)
EZ-Spray™ Silicone 20
EZ~Spray™ Silicone 20 is a sprayable silicone which cures quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray™ Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray™ Silicone 20 cures in about 20 minutes. EZ~Spray™ Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.