C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 9,300 cps | 45,000 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 15 minutes | 45 minutes |
| Cure Time | 2 hours | 24 hours |
| Shore A Hardness | 000-35 | 40 |
| Color | Translucent | Mint Green |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Ecoflex™ GEL | Mold Max™ 40 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 9,300 cps | 45,000 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:10B |
| Pot Life | 15 minutes | 45 minutes |
| Cure Time | 2 hours | 24 hours |
| Shore A Hardness | 000-35 | 40 |
| Specific Gravity | 0.98 g/cc | 1.14 g/cc |
| Specific Volume | 28 cu. in./lb. | 24.3 cu. in./lb. |
| Color | Translucent | Mint Green |
| Die B Tear Strength | — | 120 pli |
| Tensile Strength | — | 550 psi |
| Elongation @ Break | >1000 % | 250 % |
| 100% Modulus | — | 190 psi |
| Shrinkage | <.001 in. / in. | 0.004 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 400 °F |
| Dielectric Constant, 100Hz | — | 3.29 |
| Dielectric Strength | — | 330 volts/mil |
| Dissipation Factor, 100Hz | — | 0.005 |
| Refractive Index | 1.40451 | — |
| Volume Resistance | — | 8.29E+11 ohm |
| Volume Resistivity | — | 5.83E+13 ohm/cm |
Product Description
Ecoflex™ GEL
Ecoflex™ GEL is an extremely soft, platinum silicone rubber gel specifically designed for creating silicone makeup appliances, for cushioning, creating gaskets, encapsulation, and other applications requiring a very soft silicone material.
Certified Skin Safe - Cured Ecoflex™ GEL is skin safe and is certified by an independent laboratory.
Mold Max™ 40
Mold Max™ Silicones are tin-cured silicone mold rubber compounds that have exceptional working properties and library life. Mold Max™ Silicones feature Smooth-On’s exclusive “Libra™” catalyst for long library life. Mold Max™ silicones can be pigmented with Silc Pig™ silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.
Vacuum degassing mixed material using a vacuum pump and chamber to remove entrapped air is recommended.