Compare Tool

remove

Ecoflex™ GEL

Mold Max™ 14NV vs. Ecoflex™ GEL

Platinum Cure Silicone Rubber For Special Effects

 View Product

Vs.
remove

Mold Max™ 14NV

Mold Max™ 14NV vs. Ecoflex™ GELEcoflex™ GEL

Low Viscosity Tin-Cure Silicone Rubber

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
  • Silicone Rubber - Tin Cure
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life15 minutes40 minutes
Cure Time2 hours4 hours
Shore A Hardness000-3514
ColorTranslucentWhite
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Ecoflex™ GELMold Max™ 14NV
Product Type
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
  • Silicone Rubber - Tin Cure
Mixed Viscosity9,300 cps7,500 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B100A:10B
Pot Life15 minutes40 minutes
Cure Time2 hours4 hours
Shore A Hardness000-3514
Specific Gravity0.98 g/cc1.12 g/cc
Specific Volume28 cu. in./lb.24.7 cu. in./lb.
ColorTranslucentWhite
Die B Tear Strength87 pli
Tensile Strength490 psi
Elongation @ Break>1000 %600 %
100% Modulus35 psi
Shrinkage<.001 in. / in.0.002 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)400 °F
Dielectric Constant, 100Hz3.29
Dielectric Strength330 volts/mil
Dissipation Factor, 100Hz0.005
Refractive Index1.40451
Thermal Conductivity0.21 W/M*K
Volume Resistance8.29E+11 ohm
Volume Resistivity5.83E+13 ohm/cm

Product Description

Ecoflex™ GEL

Ecoflex™ GEL is an extremely soft, platinum silicone rubber gel specifically designed for creating silicone makeup appliances, for cushioning, creating gaskets, encapsulation, and other applications requiring a very soft silicone material.

Certified Skin Safe - Cured Ecoflex™ GEL is skin safe and is certified by an independent laboratory. 

Read More

Mold Max™ 14NV

Mold Max™ 14NV is a Shore 14A tin-catalyzed silicone rubber that offers low viscosity, fast cure and long library life. Mold Max™ 14 NV does not require vacuum degassing. Mix ratio is 100A:10B by weight. Working time is 40 minutes and cure time is 4 hours at room temperature. Mold Max™ 14NV will reproduce the finest detail and is suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements.

Mold Max™ 14NV can also be used to create movie special effects. Cure time can be reduced with Accel-T™ cure accelerator. Mold Max™ 14NV can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins.  Important; Do not cast concrete into rubber molds made with this product. Concrete will not cure properly and inhibition will result.

Important; you must weigh Part A & B components using a gram scale to be successful with Mold Max™ 14NV.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›