C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 9,300 cps | Light Paste |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 15 minutes | 40 minutes |
| Cure Time | 2 hours | 24 hours |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 000-35 | — |
| Color | Translucent | Dark Red |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Ecoflex™ GEL | EpoxAcoat™ HT | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 9,300 cps | Light Paste |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:18B |
| Pot Life | 15 minutes | 40 minutes |
| Thin Film Working Time | — | 75 minutes |
| Thin Film Recoat Time | — | 4 hours |
| Cure Time | 2 hours | 24 hours |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 000-35 | — |
| Specific Gravity | 0.98 g/cc | — |
| Specific Volume | 28 cu. in./lb. | — |
| Color | Translucent | Dark Red |
| Elongation @ Break | >1000 % | — |
| Shrinkage | <.001 in. / in. | — |
| Heat Deflection Temp | — | 133 °F |
| Heat Deflection With Post Cure | — | 284 °F |
| Refractive Index | 1.40451 | — |
Product Description
Ecoflex™ GEL
Ecoflex™ GEL is an extremely soft, platinum silicone rubber gel specifically designed for creating silicone makeup appliances, for cushioning, creating gaskets, encapsulation, and other applications requiring a very soft silicone material.
Certified Skin Safe - Cured Ecoflex™ GEL is skin safe and is certified by an independent laboratory.
EpoxAcoat™ HT
EpoxAcoat™ HT is a slightly thixotropic epoxy gel coat that offers high heat resistance (post cure required). Cured epoxy is tough and offers exceptional abrasion resistance. This surface coat will wet out well over a variety of surfaces with good sag resistance. Applications include laminating, precision tooling, master and pattern making, core boxes and fixtures.
Use as a surface coat for EpoxAmite™ HT high temperature laminating epoxy.