Product Type |
|
|
Mixed Viscosity | 1,800 cps | 400 cps |
Pot Life | 50 minutes | 13 seconds |
Cure Time | 16 hours | 10 minutes |
Shore A Hardness | 60 | — |
Specific Gravity | 1.04 g/cc | 0.128 g/cc |
Color | Off White | Tan |
ReoFlex™ 60 | EZ-Spray™ Foam | |
---|---|---|
Product Type |
|
|
Mixed Viscosity | 1,800 cps | 400 cps |
Mix Ratio By Volume | 1A:1B | 1A:1B |
Mix Ratio By Weight | 1A:1B | — |
Pot Life | 50 minutes | 13 seconds |
Tack Free Time | — | 2 minutes |
Cure Time | 16 hours | 10 minutes |
Shore A Hardness | 60 | — |
Expansion (approximate) | — | 7 times |
Specific Gravity | 1.04 g/cc | 0.128 g/cc |
Specific Volume | 26.7 cu. in./lb. | — |
Color | Off White | Tan |
Die C Tear Strength | 132 pli | — |
Tensile Strength | 782 psi | — |
Elongation @ Break | 581 % | — |
100% Modulus | 256 psi | — |
Shrinkage | <.001 in. / in. | — |
Density | — | 8 lb/ft³ |
ReoFlex™ urethane rubbers offer superior physical and performance properties for production casting of wax, plasters, and resins. ReoFlex™ urethanes are available in 20A, 30A, 40A, 50A and 60A Shore hardnesses and feature convenient one-to-one by volume mix ratios. Vacuum degassing is not necessary and ReoFlex™ rubbers cure with negligible shrinkage to a durable rubber that will last in production. ReoFlex™ “Wet” rubbers will shrink somewhat over time vs. “Dry” formulations.
ReoFlex™ mold rubbers are used for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. Vibrant colors can be achieved by adding So-Strong™ Color Tints, available from Smooth-On.
Casting Concrete? Look into the VytaFlex™ series of urethane mold rubbers. VytaFlex™ urethanes were formulated specifically for casting concrete / pigmented concrete and feature Smooth-On’s exclusive ‘V-Polymer™’ technology.
FOR COMMERCIAL/INDUSTRIAL USE ONLY
EZ~Spray™ Foam is a polyurethane foam compound that can be conveniently sprayed using Smooth-On’s EZ~Spray™ Junior System. Foam cures quickly to strong, lightweight and impact resistant 8 lb. rigid foam that can be used for a variety of applications including making lightweight castings. Foam can also be sprayed over certain rubber mold configurations as a mother mold material. For more information, refer to SmoothOn’s EZ~Spray™ Junior manual and video.