Compare Tool

remove

PMC™-121 30/WET

PMC™-121 30/WET vs. Dragon Skin™ 10 AF Anti Fungal

Easy To Use Urethane Rubber

 View Product

Vs.
remove

Dragon Skin™ 10 AF Anti Fungal

PMC™-121 30/WET vs. Dragon Skin™ 10 AF Anti FungalPMC™-121 30/WET

Addition Cure Silicone Rubber Compound

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Urethane Rubber
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
Mixed Viscosity1,800 cps23,000 cps
Pot Life30 minutes20 minutes
Cure Time16 hours5 hours
Shore A Hardness3010
ColorClear AmberTranslucent
100% Modulus82 psi22 psi
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

PMC™-121 30/WETDragon Skin™ 10 AF Anti Fungal
Product Type
  • Urethane Rubber
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
Mixed Viscosity1,800 cps23,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B1A:1B
Pot Life30 minutes20 minutes
Cure Time16 hours5 hours
Shore A Hardness3010
Specific Gravity1.04 g/cc1.07 g/cc
Specific Volume26.7 cu. in./lb.25.8 cu. in./lb.
ColorClear AmberTranslucent
Die B Tear Strength102 pli
Die C Tear Strength75 pli
Tensile Strength400 psi475 psi
Elongation @ Break1,000 %1,000 %
100% Modulus82 psi22 psi
Shrinkage< .001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F
Dielectric Strength>350 volts/mil

Product Description

PMC™-121 30/WET

The PMC™-121 Series urethane rubbers feature convenient one-to-one by volume mix ratios. PMC™-121/30 Wet is exceptionally strong and abrasion resistant for soft urethane mold rubbers. It exudes oil that aids in demolding hard plasters and concrete.

Read More

Dragon Skin™ 10 AF Anti Fungal

Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›