C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | Brushable | 300 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 20 minutes | 1.5 minutes |
| Cure Time | 16 hours | 2 hours |
| Shore A Hardness | 50 | — |
| Specific Volume | 23.7 cu. in./lb. | 194 cu. in./lb. |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Brush-On™ 50 | FOAM-iT!™ 8 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Brushable | 300 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 100A:125B | 2A:1B |
| Pot Life | 20 minutes | 1.5 minutes |
| Tack Free Time | — | 20 minutes |
| Cure Time | 16 hours | 2 hours |
| Shore A Hardness | 50 | — |
| Expansion (approximate) | — | 8 times |
| Foam Density | — | 8 lb/ft³ |
| Specific Gravity | 1.17 g/cc | 0.13 g/cc |
| Specific Volume | 23.7 cu. in./lb. | 194 cu. in./lb. |
| Color | Off White | Off White |
| Die C Tear Strength | 80 pli | — |
| Tensile Strength | 500 psi | — |
| Elongation @ Break | 400 % | — |
| Shrinkage | <.001 in. / in. | — |
Product Description
Brush-On™ 50
Smooth-On’s Brush-On™ Series of mold rubbers are extremely versatile and are famous for their abrasion resistance and high tear strength. They have the convenience of a one-to-one mix ratio and are easy to mix and apply with a brush or spatula.
FOAM-iT!™ 8
Smooth-On’s FOAM-iT!™ Series are two-component water blown rigid foams that are versatile and easy to use. FOAM-iT!™ products are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed 2A:1B by weight. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which FOAM-iT!™ product you are using) and develop a uniform cell structure. FOAM-iT!™ 8 is a unique, self-skinning foam with a finer, more uniform cell structure than the other FOAM-iT!™ products FOAM-iT!™ 8 can be cast in blocks as a machinable prototype modeling board.
All FOAM-iT!™ products can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with SO-Strong™, UVO™ or IGNITE™ colorants and are used for a variety of art/ craft, industrial design and special effects applications.