C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | Brushable | 1,000 cps |
| Pot Life | 20 minutes | 11 minutes |
| Cure Time | 16 hours | 8 hours |
| Shore D Hardness | — | 84 |
| Shore A Hardness | 50 | — |
| Color | Off White | Clear Yellow |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Brush-On™ 50 | EpoxAmite™ 101 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Brushable | 1,000 cps |
| Mix Ratio By Volume | 1A:1B | 4A:1B |
| Mix Ratio By Weight | 100A:125B | 100A:24B |
| Pot Life | 20 minutes | 11 minutes |
| Thin Film Working Time | — | 30 minutes |
| Cure Time | 16 hours | 8 hours |
| Shore D Hardness | — | 84 |
| Shore A Hardness | 50 | — |
| Specific Gravity | 1.17 g/cc | 1.13 g/cc |
| Specific Volume | 23.7 cu. in./lb. | 24.5 cu. in./lb. |
| Color | Off White | Clear Yellow |
| Die C Tear Strength | 80 pli | — |
| Tensile Strength | 500 psi | — |
| Tensile Modulus | — | 445,000 psi |
| Ultimate Tensile | — | 7,930 psi |
| Tensile Elongation | — | 2.45 % |
| Elongation @ Break | 400 % | — |
| Compressive Strength | — | 11,550 psi |
| Compressive Modulus | — | 121,400 psi |
| Flexural Strength | — | 13,660 psi |
| Flexural Modulus | — | 468,000 psi |
| Shrinkage | <.001 in. / in. | — |
| Heat Deflection Temp | — | 133 °F |
| Flexural Strength on 6 ply / 10 oz. Laminate | — | 30,700 psi |
| Ultimate Tensile on 6 ply / 10 oz. Laminate | — | 35,100 psi |
Product Description
Brush-On™ 50
Smooth-On’s Brush-On™ Series of mold rubbers are extremely versatile and are famous for their abrasion resistance and high tear strength. They have the convenience of a one-to-one mix ratio and are easy to mix and apply with a brush or spatula.
EpoxAmite™ 101
EpoxAmite™ 101 is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite™ 101 includes the EpoxAmite™ 100 Base and the EpoxAmite™ 101 FAST Hardener. EpoxAmite™ 101 is unfilled, low in viscosity, odorless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.
EpoxAmite™ 101 can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up applications or composite parts. EpoxAmite™ 101 can also be mixed with fillers such as fumed silica for gel coat applications. Urefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.
Applications: Wet Lay-Up Lamination, General Bonding & Repair, Clear Coating - Gel Coating, Barrier Coating, Thin-Section Casting, Water Proofing, Patching & Small Laminates
Also available: EpoxAmite™ 102 MEDIUM SET and EpoxAmite™ 103 SLOW SET