C
mpare
T
l
All Technical Data
| Simpact™ 60A | |
|---|---|
| Product Type |
|
| Mixed Viscosity | 1,100 cps |
| Mix Ratio By Volume | 1A:1B |
| Mix Ratio By Weight | 100A:94B |
| Pot Life | 4 minutes |
| Handling Time | 2 hours |
| Cure Time | 48 hours |
| Shore A Hardness | 60 |
| Specific Gravity | 1.08 g/cc |
| Specific Volume | 25.7 cu. in./lb. |
| Color | White |
| Die C Tear Strength | 142 pli |
| Tensile Strength | 990 psi |
| Elongation @ Break | 400 % |
| 100% Modulus | 312 psi |
| Shrinkage | <.007 in. / in. |
Product Description
Simpact™ 60A
Simpact™ 60A urethane is a low odor, fast-setting urethane elastomer which offers very high tear strength, impact resistance and wear resistance. Simpact™ urethanes are phthalate free, mercury free and MOCA free. Simpact™ urethanes pour easily. Working time is 4 minutes, handling time is 2 hours and full cure time is 48 hours at room temperature.
Cured rubber has exceptional performance characteristics and dimensional stability. Simpact™ urethanes can be colored with SO-Strong™, UVO™ or Ignite™ colorants. Simpact™ urethanes are suitable for making impact resistant props, prototypes and display pieces.
This material may congeal if exposed to cold temperatures. To reconstitute, Part A & B must be heated to 90°F (33°C) then thoroughly mixed to an even consistency.