Product Type |
|
|
Mixed Viscosity | 100 cps | Variable |
Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
Pot Life | 9 minutes | 15 minutes |
Cure Time | 60 minutes | 16 hours |
Color | Clear Amber | Beige |
Smooth-Cast™ 326 | EPSILON™ + 101 Hardener | |
---|---|---|
Product Type |
|
|
Mixed Viscosity | 100 cps | Variable |
Mix Ratio By Volume | 1A:1B | — |
Mix Ratio By Weight | 115A:100B | 100A:20B |
Pot Life | 9 minutes | 15 minutes |
Thin Film Working Time | — | 45 minutes |
Thin Film Recoat Time | — | 60 minutes |
Tack Free Time | — | 2 hours |
Cure Time | 60 minutes | 16 hours |
Shore D Hardness | 72 | 75 |
Specific Gravity | 1.07 g/cc | 1.16 g/cc |
Specific Volume | 25.9 cu. in./lb. | 23.9 cu. in./lb. |
Color | Clear Amber | Beige |
Tensile Strength | 3,170 psi | — |
Tensile Modulus | 140,000 psi | — |
Elongation @ Break | 10 % | — |
Compressive Strength | 3,080 psi | — |
Compressive Modulus | 32,200 psi | — |
Flexural Strength | 3,100 psi | — |
Flexural Modulus | 95,700 psi | — |
Shrinkage | 0.0075 in. / in. | — |
Heat Deflection Temp | 120 °F | — |
The Smooth-Cast™ 325, 326 & 327 ColorMatch™ Series plastics are fast-cast resins that were developed specifically for adding color pigments and fillers to achieve true color representation or filler effect. The ColorMatch™ Series is formulated “color neutral”. Small amounts of pigment will yield accurate, vivid colors from cured castings using So-Strong™ tints or Ignite™ color pigments. The ColorMatch™ Series offers the convenience of a 1A: 1B mix ratio by volume and has a very low viscosity. Demold times range from about 10 minutes to 2-4 hours (depending on product, mass and mold configuration). Note: Large mass castings will get very hot and shrink more, depending on mold configuration.
The ColorMatch™ Series also readily accept fillers (such as URE-FIL™ 3 from Smooth-On). Applications for the ColorMatch™ Series plastics include making pigmented prototype models or figures, special effect props, reproducing small to medium size sculptures, decorative jewelry, etc.
EPSILON™ is a thixotropic epoxy coating that self thickens for brushing onto a variety of surfaces without sagging. Parts A and B mix together easily, and the mixture wets out uniformly. This product is not sensitive to moisture or humidity. EPSILON™ cures at room temperature to an impact resistant plastic which exhibits good compressive and flexural strength.