Compare Tool

remove

Crystal Clear™ 202

Dragon Skin™ 10 VERY FAST vs. Crystal Clear™ 202

Clear Urethane Casting Resin

 View Product

Vs.
remove

Dragon Skin™ 10 VERY FAST

Dragon Skin™ 10 VERY FAST vs. Crystal Clear™ 202Crystal Clear™ 202

Addition Cure Silicone Rubber Compound

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Urethane Resins
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
Mixed Viscosity600 cps23,000 cps
Mix Ratio By VolumeN/A (gram scale required)1A:1B
Pot Life9 minutes4 minutes
Cure Time90 minutes30 minutes
Shore D Hardness80
Shore A Hardness10
ColorClearTranslucent
Tensile Strength3,500 psi475 psi
Elongation @ Break10 %1,000 %
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

Crystal Clear™ 202Dragon Skin™ 10 VERY FAST
Product Type
  • Urethane Resins
  • Silicone Rubber - Platinum Cure
  • Flame Rated Materials
  • Skin Safe FX Materials
Mixed Viscosity600 cps23,000 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight100A:90B1A:1B
Pot Life9 minutes4 minutes
Cure Time90 minutes30 minutes
Shore D Hardness80
Shore A Hardness10
Specific Gravity1.036 g/cc1.07 g/cc
Specific Volume26.7 cu. in./lb.25.8 cu. in./lb.
ColorClearTranslucent
Die B Tear Strength102 pli
Tensile Strength3,500 psi475 psi
Tensile Modulus86,240 psi
Elongation @ Break10 %1,000 %
100% Modulus22 psi
Compressive Strength4,200 psi
Compressive Modulus44,000 psi
Flexural Strength5,390 psi
Flexural Modulus183,200 psi
Shrinkage0.0125 in. / in.<.001 in. / in.
Heat Deflection Temp120 °F
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F
Dielectric Strength>350 volts/mil
Index of Refraction at 20°C1.49888
Index of Refraction at 25°C1.49893

Product Description

Crystal Clear™ 202

Crystal Clear™ 202 is a water white clear and made specifically for applications that require clarity. These rigid urethane casting resins differ only in working and demold times. Low viscosity ensures easy mixing and pouring. Crystal Clear™ resins cure at room temperature* with negligible shrinkage.

CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.

Read More

Dragon Skin™ 10 VERY FAST

Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›