RAMP™ Adhesion and Cure Promoter
*NOTE: Product Packaging May Vary
RAMP™ is a low viscosity liquid polymer adhesion and cure promoter developed specifically to be used with the Buddy Rhodes Vertical Mix™ carvable concrete.
Adding RAMP™ ensures proper cure of Vertical Mix™ and improved the overall physical properties. It also reduces water and salt absorption and greatly enhances freeze/thaw resistance.
IMPORTANT: Read the full technical bulletin for the Buddy Rhodes Vertical Mix before using.
Instructions
Preparation - This product has a limited shelf life and should be used as soon as possible. KEEP FROM FREEZING. Store and use at room temperature (73° F / 23° C). Wear long sleeves and disposable vinyl gloves in a well-ventilated area when using this product.
Use as an Adhesion Promoter - Apply a primer coat of RAMP™ before mixing and applying Buddy Rhodes Vertical Mix™ carvable concrete. Mix 100 parts RAMP™ with 100 parts water (50/50). Apply over all surfaces using a spray bottle, pump sprayer, or similar. Allow to become tacky before applying Vertical Mix. If primer dries completely, reapply and wait until tacky before proceeding.
Use as a Cure Promoter - Mix RAMP™ with clean water and Buddy Rhodes Vertical Mix™ in the following proportions:
Recipe For Buddy Rhodes Vertical Mix
| Buddy Rhodes Vertical Mix | Buddy Rhodes RAMP | Water | |
|---|---|---|---|
| By Weight | 34 lb (15.4 kg) | 3 lb (1.36 kg) | 7.5 lb (3.4 kg) |
| By Weight | [100 Parts] | [8.82 Parts] | [22.06 Parts] |
| By Volume | 1 Bag of Vertical Mix | 42 fluid oz. (1.24 l) | 115 fluid oz (3.4 l) |