How do I repair a torn latex mold?

The best method we found is to lightly abrate the area, and clean the area with acetone or alcohol. Then brush some UreCoat™ from Smooth-On on the tear, take some gauze or other stretch fabric and push into the wet UreCoat™ then encapsulate fully in UreCoat™. This will create a strong flexible repair to the original latex.

Disclaimer
This FAQ article is offered as a guideline and offers possible solutions to problems encountered during mold making and casting. No warranty is implied and it is up to the end user to determine suitability for any specific application. Always refer to the provided Technical Bulletins (TB) & Safety Data Sheets (SDS) before using any material. A small scale test is suggested to determine suitability of any recommendation before trying on a larger scale for any application.