C
mpare
T
l
All Technical Data
| XTC-3D™ | |
|---|---|
| Product Type |
|
| Mixed Viscosity | 350 cps |
| Mix Ratio By Volume | 2A:1B |
| Mix Ratio By Weight | 100A:42B |
| Pot Life | 10 minutes |
| Thin Film Working Time | 20 minutes |
| Thin Film Recoat Time | 90 minutes |
| Tack Free Time | 2 hours |
| Cure Time | 3.5 hours |
| Shore D Hardness | 80 |
| Specific Gravity | 1.09 g/cc |
| Specific Volume | 25.1 cu. in./lb. |
| Color | Clear (Slightly Yellow In Thick Sections) |
Product Description
XTC-3D™
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D™ cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.