C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 2,000 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 35 seconds | 20 minutes |
| Cure Time | 2 hours | 16 hours |
| Shore D Hardness | — | 60 |
| Specific Volume | 229 cu. in./lb. | 24.7 cu. in./lb. |
| Color | White | Translucent White |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 7 FR | TASK™ 11 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 2,000 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 100A:88B | 100A:100B |
| Pot Life | 35 seconds | 20 minutes |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | 16 hours |
| Shore D Hardness | — | 60 |
| Expansion (approximate) | 8 times | — |
| Foam Density | 7 lb/ft³ | — |
| Specific Gravity | 0.11 g/cc | 1.12 g/cc |
| Specific Volume | 229 cu. in./lb. | 24.7 cu. in./lb. |
| Color | White | Translucent White |
| Tensile Strength | — | 2,500 psi |
| Elongation @ Break | — | 100 % |
| Shrinkage | — | 0.0024 in. / in. |
Product Description
FlexFoam-iT!™ 7 FR
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. FlexFoam-iT!™ 7 FR certifies to FMVSS-302 Flame Specification.
› Click here for more FlexFoam-iT!™ flexible foam products.
TASK™ 11
TASK™ 11 urethane casting resin is a semi-rigid plastic (has some flexibility) that is strong and very tough. Originally developed for high impact tooling (drop hammer punch), TASK™ 11 also offers good abrasion and chemical resistance and is ideal for a variety of industrial applications.
This product is suitable for some FDA/USDA applications - dry food contact only.
TASK™ 11 applications include making abrasion resistant parts, foundry patterns, encapsulation, roller facings, metal bonding and vibration pads.