C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | 1,400 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 15 minutes | 6 minutes |
| Cure Time | 75 minutes | 24 hours |
| Shore D Hardness | — | 30 |
| Shore A Hardness | 10 | 80 |
| Color | Translucent | Light Yellow |
| Tensile Strength | 400 psi | 2,264 psi |
| Elongation @ Break | 663 % | 233 % |
| 100% Modulus | 27 psi | 855 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Dragon Skin™ 10 NV | TASK™ 16 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 6,000 cps | 1,400 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 1A:2B |
| Pot Life | 15 minutes | 6 minutes |
| Handling Time | — | 90 minutes |
| Cure Time | 75 minutes | 24 hours |
| Shore D Hardness | — | 30 |
| Shore A Hardness | 10 | 80 |
| Specific Gravity | 1.07 g/cc | 1.08 g/cc |
| Specific Volume | 25.8 cu. in./lb. | 25.64 cu. in./lb. |
| Color | Translucent | Light Yellow |
| Die B Tear Strength | 90 pli | — |
| Die C Tear Strength | — | 197 pli |
| Tensile Strength | 400 psi | 2,264 psi |
| Elongation @ Break | 663 % | 233 % |
| 100% Modulus | 27 psi | 855 psi |
| Shrinkage | <.001 in. / in. | 0.0025 in. / in. |
Product Description
Dragon Skin™ 10 NV
Dragon Skin™ NV Series silicones are easy to use translucent platinum silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature very low viscosities and vacuum degassing is not required for most applications.
TASK™ 16
TASK™16 is a low odor, fast-setting Shore 80A/30D urethane that offers very high tear strength, impact resistance and wear resistance. TASK™16 is phthalate free, mercury free and MOCA free. Mixed one part A to two parts B by weight, TASK™16 pours easily. Working time is 6 minutes and handling time is 90 minutes at room temperature. Cured rubber has exceptional performance characteristics and dimensional stability. TASK™16 can be colored with SO‑Strong™ or Ignite™ colorants.
TASK™16 is suitable for making fast mechanical parts, gaskets, wheels and pullies, impact resistant props, and archival master models. It is also used to make fast, wear resistant rubber molds for casting concrete or concrete stamping pads. TASK™16 is also an excellent choice for rotocasting to create hollow semi-rigid castings.
IMPORTANT: Cured TASK™16 will inhibit the cure of liquid platinum silicone. You can not pour platinum silicone into cured TASK™16. Tin silicone must be used if you intend to pour silicone against cured TASK™16.