Compare Tool

remove

OOMOO™ 30

OOMOO™ 30 vs. TASK™ 15

No Scale or Vacuum Chamber Required

 View Product

Vs.
remove

TASK™ 15

OOMOO™ 30 vs. TASK™ 15OOMOO™ 30

Impact Resistant Performance Resin Designed For Rotocasting

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Tin Cure
  • Urethane Resins
Mixed Viscosity4,250 cps600 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life30 minutes6 minutes
Cure Time6 hours1 hour
Shore D Hardness75
Shore A Hardness30
ColorLavenderOpaque White
Tensile Strength240 psi2,720 psi
Elongation @ Break250 %20 %
Shrinkage0.0025 in. / in.0.0042 in. / in.
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

OOMOO™ 30TASK™ 15
Product Type
  • Silicone Rubber - Tin Cure
  • Urethane Resins
Mixed Viscosity4,250 cps600 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight100A:130B75A:100B
Pot Life30 minutes6 minutes
Cure Time6 hours1 hour
Shore D Hardness75
Shore A Hardness30
Specific Gravity1.34 g/cc1.12 g/cc
Specific Volume20.6 cu. in./lb.24.7 cu. in./lb.
ColorLavenderOpaque White
Die B Tear Strength40 pli
Tensile Strength240 psi2,720 psi
Tensile Modulus126,000 psi
Elongation @ Break250 %20 %
100% Modulus100 psi
Compressive Strength5,450 psi
Compressive Modulus60,000 psi
Flexural Strength5,450 psi
Flexural Modulus170,000 psi
Shrinkage0.0025 in. / in.0.0042 in. / in.
Heat Deflection Temp117 °F
Useful Temperature (min)-65 °F
Useful Temperature (max)400 °F

Product Description

OOMOO™ 30

No Vacuuming – No Scale – Easy To Use . . . OOMOO™ 30 is an easy to use tin cure silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). It has low viscosity for easy mixing and pouring . . . vacuum degassing is not necessary. This product cures at room temperature with negligible shrinkage. OOMOO™ 30 has a 30-minute pot life, with a six-hour cure time.

For The Novice Mold Maker - OOMOO™ silicones do not have great tear strength. They are good for making simple one- or two piece block molds. If you require a high-tear strength silicone, Mold Max™ silicones are recommended.

OOMOO™ 30 is suitable for a variety of art-related and industrial applications including making one and two-piece block molds for sculpture and prototype reproduction, casting plaster, resins and wax. OOMOO™ silicones are also suitable for electrical potting and encapsulation applications.

Read More

TASK™ 15

TASK™ 15 is a premium performance urethane resin that has very high impact strength, even when cast in thin-wall sections. Pot life is 6 minutes and handling time 60 minutes at room temperature. Resin cures with negligible shrinkage.

Vibrant colors are possible by adding small amounts of SO-Strong™ tints, UVO™ pigments or IGNITE™ fluorescent colors.

Plastic fully cures with negligible shrinkage and can be machined, sanded and/or painted. TASK™ 15 features a gradual cure profile, making it ideal for rotational casting applications (making hollow parts).

Applications include making very tough prototype parts and limited run production castings as well as rotationally cast parts such as mannequins.

Click here for more TASK™ resin products.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›